Shelly Plug S Device Smart Control

Main Controls

Below the Main Controls heading, observe the current Shelly Device power in Watts (W).

Above the power button is a chart of the Shelly Device consumption in watt-hours (Wh) of the last 24 hours, and the Shelly Device’s current power consumption in Watts (W).

The power button ⏻ is at the bottom of this tab. Click the power button ⏻ to turn your device On/Off. Your device is on when there is a blue ring around the power button ⏻, and is off when the ring is gray.

Notifications

If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Tap the X button in the top right corner of the notification box if you wish to delete the notification.

Charts

Consumption

Observe a chart with the Shelly Device consumption displayed in Watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific consumption measurements. Tap the blue icon to the right of the date interval, above the chart, and change the displayed chart style.

Below the consumption chart are a variety of Shelly Device measurements. Observe the Eco (compared) value that gives a percentage of how much lower the consumption value is, and the total consumption value in Watt-hours (Wh). Below these measurements, observe the average, maximum and minimum consumption in Watt-hours (Wh).

Tap on the expand icon in the top right corner of the Consumption rectangular box if you wish to view the chart in full screen. Tap Export .csv to download this data as a CSV file.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off.

Timer

In this tab, you can set a timer to manage the device on/off state.

1. Choose from the following options:

• Auto on: Enter the number of seconds that should pass for the device to be switched on after it has been turned off. Mark the empty checkbox to enable the timer.

• Auto off: Enter the number of seconds that should pass for the device to be switched off after it has been turned on. Mark the empty checkbox to enable the timer.

2. Tap Save to confirm the setting.

Schedule

Tap Add schedule to create a schedule. Create a weekly schedule for the day(s) and time(s) you want the Shelly Device to turn On/Off automatically. You may add up to 20 weekly schedules. Set up the following settings, and navigate between pages by tapping Next or Back.

• Select the day(s) of the week.

• Choose time interval: Time, or Sunrise / Sunset, and set the time for the specified day(s):

  • Time: Tap up/down button, or type in a number, to set a time in hours and minutes.

  • Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.

• Select action: Set the action as on / off.

• Tap Save to save the schedule.

Once the schedule has been created, it will appear as a rectangular box on the main Schedule page for the Shelly Device. On this box, you can see the schedule details such as the days of the week, action and time. You can enable/disable schedules by tapping the toggle button at the top of this page. You can edit the schedule by tapping on the edit pencil icon on the right, and delete the schedule by tapping the trash icon on the right. Please note this function requires a working connection to the Internet.

Actions

Use events to trigger http endpoints. Add URLs to execute when actions are complete. Click the edit pencil icon of the action you wish to activate in order to add URLs.

Add URLs to the following actions:

• Button on

• Output on

• Output off

Follow these steps to add URLs:

• Click the edit pencil icon next to the action to which you wish to add URLs.

• Click the + Add URL button and input up to 5 URLs to execute when the actions is complete. If you wish to delete a URL, delete it by clicking the trash icon to the right of it.

• Click the Save button once you have added your URLs.

This function requires a working connection to the Internet. You can enable/disable an action by clicking toggle button to the left of the action box. You can edit the action by clicking on the edit pencil icon on the right.

Networks

Wi-Fi

Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other. Tap Save to save any changes made.

Access Point

Mark the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi Access Point (AP), to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access. Mark the checkbox to set the AP it to be an open network. Tap Save to save any changes made.

Restrict login

Restrict the web interface of the Shelly Device with a username and password. Mark the checkbox to enable this function. Tap Save to save any changes made.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Mark the toggle button to enable this function.

To disable the cloud connection, click the toggle button again. A confirmation prompt will appear. Tap Confirm if you're certain you want to disable the cloud connection for this device.

Safety

With power metering capabilities, the Shelly Device precisely monitors your appliances power consumption.

Max Power Protection

Configure Shelly Device to turn off when power consumption reaches a set value in watts (W). Input a value between 0 W and 2500 W. Click the Save button to save any changes made.Please note the power range you can set is 0 W - 2500 W.

Application Settings

AI Model

Tap the toggle to Enable AI model. View the date on which the AI model was last reset.

Tap Reset model to reset the current AI model for this device. This will remove all learned data and start the learning process from scratch.

Device Card Customization

You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Tap Customize device card to customize device card.

• Choose to customize the Big Parameter Slot or Small Parameter Slot.

  • Big Parameter Slot:

    • Choose the slot as one of the following: None / Action / Parameter.

    • If you choose the slot content as Parameter, select the parameter type from the dropdown menu.

    • View the preview below.

  • Small Parameter Slot:

    • View the list of Selected Parameters and Additonal Parameters.

    • Tap the add + button to add the Available Parameters. If you wish to remove a parameter, tap the subtract - button.

    • Tap the move button, and drag and drop the parameter to the desired position under Selected Parameters.

    • View the preview below.

• Tap Save to save any changes made.

Appliance Type

Appliance Types

Select the appliance type to which the Shelly Device is connected to. Choose one of the following from the following options:

• Lighting

• Entertainment

• Heating/cooling

• Refrigeration

• Laundry & cleaning

• Cooking

• Pool and Garden

• Electric vehicle

• Ventilation

• Water heater

• Roller

• Other

Source

Select the generated energy type. Choose from the following options:

• Grid source

• Generated energy

Tap Save to save any changes made.

Energy Calculation

Tap the toggle to enable exclusion of device from total room/account energy.

Pin lock

Tap the toggle button to enable Pin lock for this Shelly Device.

Exclude From Activity Log

Tap the toggle to exclude this Shelly Device from the global activity log.

Forgotten Lights Reminder

You can enable the device “Forgotten Lights Reminder” if your device is designated as a “light” in the “Application type” setting. Tap the first toggle to enable forgotten lights tracking. Tap the next toggle to enable forgotten lights email and push notifications.

Device Notifications

Tap the toggle next to each of the following notification types to enable them:

• Enable offline email notifications.

• Enable offline push notifications.

• Enable over power email notifications.

• Enable over power push notifications.

• Enable overtemperature email notifications.

• Enable overtemperature push notifications.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and click the Remove from my account button if you wish to delete it from your account.

Settings

Eco Mode

Click the toggle button to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Power on Default

Set relay power on default:

• On: Configure Shelly device to Turn ON, when it has power.

• Off: Configure Shelly device to Turn OFF, when it has power.

• Restore last: Configure Shelly device to Restore the last mode it was in, when it has power.

Click the Save button to save any changes made.

LED Status Disable

Click the toggle button to disable Wi-Fi status LED. Click the toggle button to disable power-on state light.

Device Card Customization

You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Click the Customize device card button to customize device card.

• Choose to customize the Big Parameter Slot or Small Parameter Slot.

  • Big Parameter Slot:

    • Choose the slot as one of the following: None / Action / Parameter.

    • If you choose the slot content as Parameter, select the parameter type from the dropdown menu.

    • View the preview below.

  • Small Parameter Slot:

    • View the list of Selected Parameters and Additonal Parameters.

    • Click the add + button to add the Available Parameters. If you wish to remove a parameter, click the subtract - button.

    • Click the move button, and drag and drop the parameter to the desired position under Selected Parameters.

    • View the preview below.

• Click the Save button to save any changes made.

Firmware Version

Shows your current firmware version. Click the Check for update button to check if a firmware updated is available. If a newer firmware version is available, you can update your Shelly device by clicking the Update button.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

• Select it manually by choosing your Time zone from the dropdown menu.

  • Set the daylight saving as on / off / auto.

  • Input your location Latitude and Longitude.

• Select your location from the map by clicking Select from map button.

• Enable automatic detection by clicking the Auto detect location button. You may also set automatic detection by clicking the checkbox at the top of this section.

Click the Save button to save any changes made.

Device name

Change the current device name. Click the toggle button to sync device name. This will reflect on the Shelly Device name in the application if the “Sync name” application setting is enabled. The sync is only from the application to the device and not vice-versa. Click the Save button to save any changes made.

Factory Reset

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Reboot

Click the Reboot button to reboot your Shelly Device.

Device Information

Here you can view the Shelly Device ID, Device IP, and Device Type, and other device information. Click the clipboard icon to copy the desired information. Click the Delete button to delete this Shelly Device from your account.