Skip to main content
Skip table of contents

Shelly 1 Device Smart Control

Main Controls

Below the Main Controls heading, observe the timer setting in seconds if enabled.

The power button is at the bottom of this tab. Click the power button to turn your device On/Off. Your device is on when there is a blue ring around the power button , and is off when the ring is gray.

Notifications

If you have Shelly Device notifications, they will appear on this tab.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off.

Timer

Allows you to manage the power supply automatically. You may use:

  • Auto on: After turning off, the relay output will be automatically turned on after a predefined time (in seconds).

  • Auto off: After turning on, the relay output will be automatically turned off after a predefined time (in seconds).

Schedule

Click the Add schedule button to create a schedule. Create a weekly schedule for the day(s) and time(s) you want the corresponding device to turn On/Off automatically. You may add up to 20 weekly schedules. This function requires a working connection to the Internet.

  • Select the day(s) of the week. Click the NEXT button.

  • Choose time interval: Time, or Sunrise / Sunset, and set the time for the previously selected day(s):

    • Time: Click up/down button, or type in a number, to set a time in hours and minutes.

    • Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.

  • Select action: Select the action as On / Off.

  • Click the Save button to save the schedule or any changes made.

Once the schedule has been created, it will appear as a rectangular box on the main Schedule page for the Shelly Device. On this box, you can see the schedule details such as the days of the week, action and time. You can enable/disable a schedule by clicking the toggle button on the left of the schedule box. You can edit the schedule by clicking on the edit pencil icon on the right, and delete the schedule by clicking the trash icon on the right.

Actions

For each possible condition, check the toggle button to enable the condition. Click the edit icon, and input up to 5 URLs in order to trigger http endpoints. Click the save button once you have added your URLs. Click the Save button to save any changes made. Possible conditions are:

  • Button on

  • Button off

  • Long push

  • Short push

  • Output on

  • Output off

This function requires a working connection to the Internet. Once the action has been created, it will appear as a rectangular box on the main Actions page for the Shelly Device. You can enable/disable an action by click the toggle button to the left of the action box. You can edit the action by clicking on the edit pencil icon on the right, and delete the action by clicking the trash icon on the right.

Scripts

Use the Scripts functionality to create or import scripts.

  • Library: Click the Open Library button to view existing scripts. Click on the desired script and click the Insert code button to add the script to your Shelly Device.

  • Create new script: Click the Create new script button. A new page will appear where you can name, create, edit and save your script. Click the play button to run your script. Click the x button to exit the script. Click the trash icon to delete your script.

For an existing script, click the toggle button of the script you wish to enable. Click the play button of the script you wish to execute. Click the edit pencil icon to update the script, and the trash icon to delete it.

Networks

Wi-Fi

Register the Shelly device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and the Shelly device disconnects from one of the networks, it will connect to the other.

Access Point

Enable to configure the Shelly device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.

Wi-Fi AP Roaming

Click the Enable checkbox. Set the RSSI signal strength value below which the device will periodically scan for a better access point. Set a value between -50 to -90. Click the APPLY button to apply any changes made.

Restrict Login

Restrict the web interface of the device with a username and password. Click the APPLY button to apply any changes made.

Cloud

Click the checkbox to enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Click the APPLY button to apply any changes made.

Application Settings

Appliance Type

Select the appliance type to which the Shelly Device is connected to. Choose one of the following from the dropdown menu: Lighting / Entertainment / Heating/cooling / Refrigeration / Laundry & cleaning / Cooking / Pool and Garden / Electric vehicle / Ventilation / Grid source / Solar source / Water heater / Roller / Other. Click the Save button to save any changes made.

Pin lock

Enable/disable PIN lock for this Shelly Device.

Sync Name

Keep the device name in sync with the name given in the app.

Input State Display

Turn on indicator for the current status of the physical switch connected to Shelly Device. When enabled, a small line appears on the power button, below the power symbol . A red line indicates the physical switch is off, while a blue line indicates the physical switch is on.

Exclude From Activity Log

Click the checkbox to disable activity log reports for this device.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared it with you, and click the Remove from my account button if you wish to delete it from your account.

Settings

Eco Mode

Click the checkbox to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Power On Default

Select from the following:

  • On: Configure Shelly Device to turn on when it has power.

  • Off: Configure Shelly Device to turn off when it has power.

  • Restore last mode: Configure Shelly Device to restore the last mode it was in when it has power.

  • SWITCH - Operates this Shelly device according to the state of the switch connected to the device.

Click the Save button to save any changes made.

Button Type

Select from the following to set button type:

  • Momentary - Set this Light to be a “Momentary” switch. Push-for “ON” or Push-for “OFF”.

  • Toggle switch - toggle mode with a single switch. Switch acts as a flip switch with one state for "ON" and one state for "OFF".

  • Edge Switch - edge on/off mode with single switch. Changes state on every hit.

  • Detached Switch - switch doesn’t control the dimmer output.

  • Activation Switch - use it for motion sensor. Any input turns “ON” and resets Auto OFF timer.

  • Reverse inputs - If you enable this option, the buttons On/Off position will be inverted.

Click the Save button to save any changes made.

Long Push

Set the time to register a long push in milliseconds (ms).

External Switch

Click the check box to Enable the external switch. You have the option to enable “Flipping the switch turns output ON/OFF”, and to “Reverse switch position”. Select one of the following as the external switch add-on interface icon: Basic / Door / Garage.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

  • Select it manually by choosing your Time zone from the dropdown menu.

    • Set the daylight saving as on / off / auto.

    • Input your location Latitude and Longitude.

  • Select your location from the map by clicking Select from map button.

  • Enable automatic detection by clicking the Auto detect location button.

Device Name

Set a name for your device.

Channel Name

Change the current channel name. This will reflect on the device name in the application if the “Sync name” application setting is enabled. Once you have input a channel name, click the Save button to save any changes made.

Firmware Update

Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the Update button.

Factory Reset

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Reboot

Reboot your Shelly Device.

Device Information

Here you can view the Shelly Device ID, IP and other device settings.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.