Skip to main content
Skip table of contents

Shelly H&T Device Smart Control

Main Controls

Below the Main Controls heading, observe the current room humidity, Shelly Device battery as a percentage, and the latest date and time temperature/humidity was measured.

Observe the room temperature chart at the bottom of this tab, which display the temperatures measured in the last 24 hours. Below the temperature chart is the current measured room temperature.

Notifications

If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Click the X button in the top right corner of the notification box if you wish to delete the notification.

Charts

Temperature

Observe a chart of the room temperature, with the maximum and minimum temperatures. The blue line chart displays the minimum temperature. The red line chart displays the maximum temperature. Above the temperature chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific temperature measurement. Click the blue icon to the right of the date interval, above the chart, and change the displayed chart style.

Click on the expand icon in the top right corner of the Temperature rectangular box if you wish to view the chart in full screen. Below the temperature chart, observe the average, maximum, and minimum temperature values in the specified time range. Below these values, you can click the Export .csv button to download the temperature data as a CSV file.

Humidity

Observe a chart of the room humidity. Above the humidity chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific humidity measurement. Click the blue icon to the right of the date interval, above the chart, and change the displayed chart style.

Click on the expand icon in the top right corner of the Humidity rectangular box if you wish to view the chart in full screen. Below the humidity chart, observe the average, maximum, and minimum humidity values in the specified time range. Below these values, you can click the Export .csv button to download the humidity data as a CSV file.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time, and click the dropdown button to observe the room temperature, Shelly Device battery as a percentage, and room humidity as a percentage.

Sensor settings

External power

Click the checkbox to enable/disable the external power supply. Click the Save button to save any changes made.

Temperature units

Choose temperature units as ºC/ºF.

Temperature Threshold

Input a value for the threshold temperature change which will cause the Device to wake up and trigger a sensor data report. Add or subtract a value from your sensor measurements. Click the Save button to save any changes made.

Temperature offset

Add or subtract a value from your sensor measurements. Set the humidity offset by inputting a value between -50ºC and 50ºC, or -90ºF and 90ºF. Click the Save button to save any changes made.

Humidity Threshold

Input a value for the threshold relative humidity change which will cause the Device to wake up and trigger a sensor data report. Click the Save button to save any changes made.

Humidity offset

Add or subtract a value from your sensor measurements. Set the humidity offset by inputting a value between -50 and 50. Click the Save button to save any changes made.

Actions

Add URLs to trigger http endpoints. Add URLs to be able to enable Sensor reports.

  • Click the edit icon to add up to 5 URLs to hit when the action is complete.

  • Click the + Add URL button to add another URL, or click the trash icon to delete a URL. URLs will be executed one after the other.

  • Click the Save button to save any changes made.

  • Click the toggle button to enable Sensor reports.

This function requires a working connection to the Internet. Please note that more than two actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Sensor actions

For each possible condition, click the corresponding toggle button to enable it. Click the edit icon, and input up to 5 URLs per condition in order to trigger http endpoints. For each condition, follow these steps:

  • Temperature over:

    • Input the temperature above which the action will be executed.

    • Click the + Add URL button to add up to 5 URLs to hit when the action is complete. Click the trash icon to the right of a URL if you wish to delete it.

    • Select whether the action is to be executed One time / Repeatedly.

    • Click the Save button to save any changes made.

  • Temperature under:

    • Input the temperature under which the action will be executed.

    • Click the + Add URL button to add up to 5 URLs to hit when the action is complete. Click the trash icon to the right of a URL if you wish to delete it.

    • Select whether the action is to be executed One time / Repeatedly.

    • Click the Save button to save any changes made.

  • Humidity over:

    • Input the humidity value above which the action will be executed.

    • Click the + Add URL button to add up to 5 URLs to hit when the action is complete. Click the trash icon to the right of a URL if you wish to delete it.

    • Select whether the action is to be executed One time / Repeatedly.

    • Click the Save button to save any changes made.

  • Humidity under:

    • Input the humidity value under which the action will be executed.

    • Click the + Add URL button to add up to 5 URLs to hit when the action is complete. Click the trash icon to the right of a URL if you wish to delete it.

    • Select whether the action is to be executed One time / Repeatedly.

    • Click the Save button to save any changes made.

This function requires a working connection to the Internet. Please note that more than two actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Networks

Wi-Fi

Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other. Click the Save button to save any changes made.

Access Point

Click the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi Access Point (AP), to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access. Click the checkbox to set the AP it to be an open network. Click the Save button to save any changes made.

Restrict Login

Restrict the web interface of the device with a Username and Password. Click the Save button to save any changes made.

Application Settings

Exclude From Activity Log

Click the toggle button to exclude this Shelly Device from the global activity log.

Device Notifications

Click the toggle button next to each of the following notification types to enable them:

  • Enable device problem email notifications

  • Enable device problem push notifications.

  • Enable offline email notifications.

  • Enable offline push notifications.

  • Enable low battery email notifications.

  • Enable low battery push notifications.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and click the Remove from my account button if you wish to delete it from your account.

Settings

Device Card Customization

You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Click the Customize device card button to customize device card.

  • Choose to customize the Big Parameter Slot or Small Parameter Slot.

    • Big Parameter Slot:

      • Choose the slot as one of the following: None / Parameter.

      • If you choose the slot content as Parameter, select the parameter type from the dropdown menu.

      • View the preview below.

    • Small Parameter Slot:

      • View the list of Selected Parameters and Additonal Parameters.

      • Click the add + button to add the Available Parameters. If you wish to remove a parameter, click the subtract - button.

      • Click the move button, and drag and drop the parameter to the desired position under Selected Parameters.

      • View the preview below.

  • Click the Save button to save any changes made.

Firmware Version

Shows your current firmware version. Click the Check for update button to check if a firmware updated is available. If a newer firmware version is available, you can update your Shelly device by clicking the Update button.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

  • Select it manually by choosing your Time zone from the dropdown menu.

    • Set the Daylight saving time as on / off / auto.

    • Input your location Latitude and Longitude.

  • Select your location from the map by clicking Select from map button.

  • Enable automatic detection by clicking the Auto detect location button. You may also set automatic detection by clicking the checkbox at the top of this section.

Click the Save button to save any changes made.

Device Name

Change the current device name. Click the toggle button to sync device name. This will reflect on the Shelly Device name in the application if the “Sync name” application setting is enabled. The sync is only from the application to the device and not vice-versa. Click the Save button to save any changes made.

Factory Reset

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Reboot

Click the Reboot button to reboot your Shelly Device.

Device Information

Here you can view the Shelly Device ID, Device IP, and Device Type, and other device information. Click the clipboard icon to copy the desired information. Click the Delete button to delete this Shelly Device from your account.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.