Skip to main content
Skip table of contents

Shelly 1L Device Smart Control

Main Controls

Below the Main Controls heading, observe the current Shelly Device power in Watts (W), the set timer in seconds, and whether or not the Shelly Device is active.

Observe the Shelly Device’s consumption chart showing power consumption in Watts (W) of the last 24 hours. Below the consumption chart, observe the current Shelly Device power consumption in kilo-Watts (kW).

The power button is at the bottom of this tab. Tap the power button to turn your Shelly device On/Off. Your device is on when there is a blue ring around the power button , and is off when the ring is gray.

Notifications

If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Tap the X button in the top right corner of the notification box if you wish to delete the notification.

Charts

Consumption

Observe a chart with the Shelly Device consumption displayed in Watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific consumption measurements. Click the blue icon to the right of the date interval, above the chart, and change the displayed chart style.

Below the consumption chart are a variety of Shelly Device measurements. Observe the Eco (compared) value that gives a percentage of how much lower the consumption value is, and the total consumption value in Watt-hours (Wh). Below these measurements, observe the average, maximum and minimum consumption in Watt-hours (Wh).

Click on the expand icon in the top right corner of the Consumption rectangular box if you wish to view the chart in full screen. Click the Export .csv button to download this data as a CSV file.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off.

Timer

In this tab, you can set a timer to manage the device on/off state.

  1. Choose from the following options:

  • Auto on: Enter the number of seconds that should pass for the device to be switched on after it has been turned off. Mark the empty checkbox to enable the timer.

  • Auto off: Enter the number of seconds that should pass for the device to be switched off after it has been turned on. Mark the empty checkbox to enable the timer.

  1. Tap Save to confirm the setting.

Schedule

Tap Add schedule to create a schedule. Create a weekly schedule for the day(s) and time(s) you want the Shelly Device to turn On/Off automatically. You may add up to 20 weekly schedules. Set up the following settings, and navigate between pages by tapping Next or Back.

  • Select the day(s) of the week.

  • Choose time interval: Time, or Sunrise / Sunset, and set the time for the specified day(s):

    • Time: Tap up/down button, or type in a number, to set a time in hours and minutes.

    • Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.

  • Select action: Set the action as on / off.

  • Tap the Save button to save the schedule.

Once the schedule has been created, it will appear as a rectangular box on the main Schedule page for the Shelly Device. On this box, you can see the schedule details such as the days of the week, action and time. You can enable/disable schedules by tapping the toggle button at the top of this page. You can edit the schedule by tapping on the edit pencil icon on the right, and delete the schedule by tapping the trash icon on the right. Please note this function requires a working connection to the Internet.

Actions

Use events to trigger http endpoints. Add URLs to execute when actions are complete. Click the edit pencil icon of the action you wish to activate in order to add URLs.

Add URLs to the following actions:

  • 1 Button on

  • 1 Button off

  • 1 Button long push

  • 1 Button short push

  • 2 Button on

  • 2 Button off

  • 2 Button long push

  • 2 Button short push

  • Output on

  • Output off

Follow these steps to add URLs:

  • Tap the edit pencil icon next to the action to which you wish to add URLs.

  • Tap + Add URL and input up to 5 URLs to execute when the actions is complete. If you wish to delete a URL, click the trash icon to the right of it.

  • Tap Save once you have added your URLs.

Enable/disable an action by tapping the toggle button to the left of the action box. You can edit the action by tapping on the edit pencil icon on the right.

Please note that more than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Networks

Wi-Fi

Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other. Tap Save to save any changes made.

Access Point

Mark the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi Access Point (AP), to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access. Mark the checkbox to set the AP it to be an open network. Tap Save to save any changes made.

Restrict login

Restrict the web interface of the Shelly Device with a username and password. Mark the checkbox to enable this function. Tap Save to save any changes made.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Mark the toggle button to enable this function.

To disable the cloud connection, click the toggle button again. A confirmation prompt will appear. Tap Confirm if you're certain you want to disable the cloud connection for this device.

Application Settings

AI Model

Tap the Enable AI model toggle. View when the date the AI model was last reset on. View the progress as a percentage below.

Tap Reset model to rest the current AI model for this device. This will remove all learned data and start the learning process from scratch.

Device Card Customization

You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Tap Customize device card to customize device card.

  • Choose to customize the Big Parameter Slot or Small Parameter Slot.

    • Big Parameter Slot:

      • Choose the slot as one of the following: None / Action / Parameter.

      • If you choose the slot content as Parameter, select the parameter type from the dropdown menu.

      • View the preview below.

    • Small Parameter Slot:

      • View the list of Selected Parameters and Additonal Parameters.

      • Tap add + to add the Available Parameters. If you wish to remove a parameter, tap subtract -.

      • Tap the move icon, and drag and drop the parameter to the desired position under Selected Parameters.

      • View the preview below.

  • Tap Save to save any changes made..

Appliance Type

Appliance Types

Select the appliance type to which the Shelly Device is connected to. Choose one of the following from the following options:

  • Lighting

  • Entertainment

  • Heating/cooling

  • Refrigeration

  • Laundry & cleaning

  • Cooking

  • Pool and Garden

  • Electric vehicle

  • Ventilation

  • Water heater

  • Other

  • Roller

Source

Select the generated energy type. Choose from the following options:

  • Grid source

  • Generated energy

Tap Save to save any changes made.

Energy Calculation

Tap the corresponding toggle button to enable/disable exclusion of device from total room/account consumption.

Input State Display

Turn on indicator for the current status of the physical switch connected to Shelly Device. When enabled, a small line appears on the power button, below the power symbol . A red line indicates the physical switch is off, while a blue line indicates the physical switch is on.

Pin Lock

Tap the toggle to set a device pin lock.

Exclude From Activity Log

Tap the toggle to exclude this Shelly Device from the global activity log.

Forgotten Lights Reminder

You can enable the device “Forgotten Lights Reminder” if your device is designated as a “light” in the “Appliance type” setting. Tap the first toggle button to enable forgotten lights tracking. Tap the next toggle to enable forgotten lights email and push notifications.

Device Notifications

Click the toggle button next to each of the following notification types to enable them:

  • Enable offline email notifications.

  • Enable offline push notifications.

  • Enable overtemperature email notifications.

  • Enable overtemperature push notifications.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and click the Remove from my account button if you wish to delete it from your account.

Settings

Eco Mode

Tap the toggle to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Power on Default

  • On: Configure Shelly device to Turn ON, when it has power.

  • Off: Configure Shelly device to Turn OFF, when it has power.

  • Restore last mode: Configure Shelly device to Restore the last mode it was in, when it has power.

  • SWITCH 1: Operates the Shelly device according to the state of the switch 1 connected to the device.

  • SWITCH 2: Operates the Shelly device according to the state of the switch 2 connected to the device.

Tap Save to save any changes made.

Button Type 1

  • Momentary: Set this Relay to be "Momentary" switch. Push for "ON" or Push for "OFF".

  • Toggle Switch: Set this Relay to be "Toggle" switch. Act as a flip switch with one state for "ON" and one state for "OFF".

  • Edge Switch: Set this Relay to be "Edge" switch. Changes state on every hit.

  • Detached Switch: Set this Relay to be in "Detached" switch mode - switch is separated from the relays.

  • Activation Switch: Use it for motion sensor. Any input turns “ON” and resets Auto OFF timer.

  • Reverse inputs: If you enable this option, the buttons On/Off position will be inverted.

Tap Save to save any changes made.

Button Type 2

  • Momentary: Set this Relay to be "Momentary" switch. Push for "ON" or Push for "OFF".

  • Toggle Switch: Set this Relay to be "Toggle" switch. Act as a flip switch with one state for "ON" and one state for "OFF".

  • Edge Switch: Set this Relay to be "Edge" switch. Changes state on every hit.

  • Detached Switch: Set this Relay to be in "Detached" switch mode - switch is separated from the relays.

  • Activation Switch: Use it for motion sensor. Any input turns “ON” and resets Auto OFF timer.

  • Reverse inputs: If you enable this option, the buttons On/Off position will be inverted.

Tap Save to save any changes made.

Long Push

Set a time to register as a long push in milliseconds (ms). Tap Save to save any changes made.

Power Consumption

Set the power consumption in Watts (W) when the output it switched ON. Tap Save to save any changes made.

Swap Inputs

Tap the toggle input to enable this option. If you enable this option, button 1 and 2 will be swapped.

LED status disable

Click the toggle button to disable Wi-Fi status LED.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

  • Select it manually by choosing your Time zone from the dropdown menu.

  • Select your location from the map by tapping Select from map.

  • Enable automatic detection by tapping Auto detect location. You may also set automatic detection by clicking the checkbox at the top of this section.

Tap Save to save any changes made.

Device Name

Change the current device name. Tap the toggle to sync device name. Keep the device name in sync with the name given in the application if the “Sync name” is enabled. The sync is only from the application to the device and not vice-verse. Tap Save to save any changes made.

Channel Name

Change the current channel name. This will reflect on the channel name in the settings. Once you have input a channel name, tap the Save button to save any changes made.

Firmware Version

Shows your current firmware version. Tap Check for update to check if a firmware updated is available. If a newer firmware version is available, you can update your Shelly device by tapping the Update button.

Factory Reset

Tap the toggle to enable factory reset from input. By enabling this setting, you can reset the Shelly Device from the device input.

Tap the toggle to enable factory reset by power cycle. By enabling this setting, you can reset the Shelly Device by 5 quick successive power cycles.

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Reboot

Tap Reboot to reboot your Shelly Device.

Device Information

Here you can view the ID, IP and other settings of your device. Copy Device ID, Decimal ID, Device IP, and Device Type by clicking the copy icon to the right of each. Tap Delete to delete this Shelly Device from your account.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.