Skip to main content
Skip table of contents

Shelly EM Device Smart Control

Main Controls

View the Shelly Device total power in Watts (W), total power returned in Watts (W), overall consumption in Watt-hours (Wh), voltage in Volts (V), reactive power (VAR), and power factor (PF). Below these measurements, observe a consumption chart, in Watt-hours (Wh), of the Shelly Device in the last 24 hours.

The power button ⏻ is at the bottom of this tab. Tap the power button ⏻ to turn your device On/Off. Your device is on when there is a blue ring around the power button ⏻, and is off when the ring is gray.

Notifications

If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Tap the X button in the top right corner of the notification box if you wish to delete the notification.

Charts

Consumption

Observe a chart with the Shelly Device consumption displayed in Watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific consumption measurements. Tap the blue icon to the right of the date interval, above the chart, and change the displayed chart style.

Below the consumption chart are a variety of Shelly Device measurements. Observe the Eco (compared) value that gives a percentage of how much lower the consumption value is, and the total consumption value in Watt-hours (Wh). Below these measurements, observe the average, maximum and minimum consumption in Watt-hours (Wh).

Tap on the expand icon in the top right corner of the Consumption rectangular box if you wish to view the chart in full screen. Tap Export .csv to download this data as a CSV file.

Voltage

Observe a chart with the Shelly Device maximum and minimum voltage displayed in Volts (V). Above the voltage chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific voltage measurements. Tap the blue icon to the right of the date interval, above the chart, and change the displayed chart style.

Below the voltage chart are a variety of Shelly Device measurements. Observe the average, maximum, and minimum Shelly Device voltage in Volts (V).

Tap on the expand icon in the top right corner of the Voltage rectangular box if you wish to view the chart in full screen. Tap Export .csv to download this data as a CSV file.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off.

Timer

In this tab, you can set a timer to manage the device on/off state.

  1. Choose from the following options:

  • Auto on: Enter the number of seconds that should pass for the device to be switched on after it has been turned off. Mark the empty checkbox to enable the timer.

  • Auto off: Enter the number of seconds that should pass for the device to be switched off after it has been turned on. Mark the empty checkbox to enable the timer.

  1. Tap Save to confirm the setting.

Schedule

Tap Add schedule to create a schedule. Create a weekly schedule for the day(s) and time(s) you want the Shelly Device to turn On/Off automatically. You may add up to 20 weekly schedules. Set up the following settings, and navigate between pages by tapping Next or Back.

  • Select the day(s) of the week.

  • Choose time interval: Time, or Sunrise / Sunset, and set the time for the specified day(s):

    • Time: Tap up/down button, or type in a number, to set a time in hours and minutes.

    • Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.

  • Select action: Set the action as on / off.

  • Tap Save to save the schedule.

Once the schedule has been created, it will appear as a rectangular box on the main Schedule page for the Shelly Device. On this box, you can see the schedule details such as the days of the week, action and time. You can enable/disable schedules by tapping the toggle button at the top of this page. You can edit the schedule by tapping on the edit pencil icon on the right, and delete the schedule by tapping the trash icon on the right. Please note this function requires a working connection to the Internet.

Actions

Use events to trigger http endpoints. For each possible condition, tap the toggle to enable the condition. Tap the edit icon, and input up to 5 URLs in order to trigger http endpoints. Tap + Add URL to add another URL, or click the trash icon to delete a URL. Possible conditions are:

  • Over power: Once the edit icon has been clicked, input a value for the 'When over power' threshold. When this threshold is surpassed, the URL(s) will be executed. Add up to 5 URLs to hit when the action is complete. Tap Save to save any changes made.

  • Under power: Once the edit icon has been clicked, input a value for the 'When under power' threshold. When this threshold is surpassed, theURL(s) will be executed. Add up to 5 URLs to hit when the action is complete. Tap Save to save any changes made.

  • Output on

  • Output off

This function requires a working connection to the Internet. Please not that more than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Networks

Wi-Fi

Register the Shelly device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and the Shelly device disconnects from one of the networks, it will connect to the other. Tap Save to save any changes made.

Access Point

Mark the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi Access Point (AP), to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access. Mark the checkbox to set the AP it to be an open network. Tap Save to save any changes made.

Wi-Fi AP Roaming

Mark the Enable checkbox. Set the RSSI signal strength value below which the device will periodically scan for a better access point. Set a value between -50 to -90. Tap Save to save any changes made.

Restrict Login

Mark the checkbox to restrict the web interface of the device with a username and password. Enter a username and password. Tap Save to save any changes made.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Tap the toggle to enable this function.

To disable the cloud connection, click the toggle button again. A confirmation prompt will appear. Tap Confirm if you're certain you want to disable the cloud connection for this device.

Safety

Customize max power protection the Shelly Device. Mark the checkbox to enable Custom Max power protection. Enter a value between 0 and 26000 Watts (W). Configure the Shelly Device to turn off when power consumption reaches the set value. Tap Save to save any changes made.

Application Settings

Tap Enable AI model to enable the AI model, and view the latest AI model reset. Tap the Reset model button to reset the current AI model for this device. This will remove all learned data and start the learning process from scratch.

Appliance Type

Device Card Customization

You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Click the Customize device card button to customize device card.

  • Choose to customize the Big Parameter Slot or Small Parameter Slot.

    • Big Parameter Slot:

      • Choose the slot as one of the following: None / Action / Parameter.

      • If you choose the slot content as Parameter, select the parameter type from the dropdown menu.

      • View the preview below.

    • Small Parameter Slot:

      • View the list of Selected Parameters and Additonal Parameters.

      • Click the add + button to add the Available Parameters. If you wish to remove a parameter, click the subtract - button.

      • Click the move button, and drag and drop the parameter to the desired position under Selected Parameters.

      • View the preview below.

  • Click the Save button to save any changes made.

Appliance Types

Select the appliance type to which the Shelly Device is connected to. Choose one of the following from the following options:

  • Lighting

  • Entertainment

  • Heating/cooling

  • Refrigeration

  • Laundry & cleaning

  • Cooking

  • Pool and Garden

  • Electric vehicle

  • Ventilation

  • Water heater

  • Roller

  • Other

Generated Energy

Select the generated energy type. Choose from the following options:

  • Grid source

  • Generated energy

Tap Save to save any changes made.

Energy Calculation

Tap the toggle to enable/disable exclusion of device from total room/account energy.

Pin Lock

Tap the toggle to enable/disable and set Shelly Device pin lock.

Exclude From Activity Log

Tap the toggle to exclude this Shelly Device from the global activity log.

Device Notifications

Click the toggle button next to each of the following notification types to enable them:

  • Enable offline email notifications.

  • Enable offline push notifications.

  • Enable over power email notifications.

  • Enable over power push notifications.

  • Enable overvoltage email notifications.

  • Enable overvoltage push notifications.

  • Enable overtemperature email notifications.

  • Enable overtemperature push notifications.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and click the Remove from my account button if you wish to delete it from your account.

Settings

Eco Mode

Tap the toggle button to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you enable/disable this function.

Power on default:

  • On: Configure Shelly device to Turn ON, when it has power.

  • Off: Configure Shelly device to Turn OFF, when it has power.

  • Restore last mode: Configure Shelly device to Restore the last mode it was in, when it has power.

Tap Save to save any changes made.

Transformer type

Set the transformer type as 50A or 120A. Tap Save to save any changes made.

LED status disable

Tap the toggle to disable Wi-Fi status LED.

Firmware Version

Shows your current firmware version. If a newer version is available, you can update your Shelly device by tapping the Update button.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

  • Select it manually by choosing your Time zone from the dropdown menu.

    • Set the daylight saving as on / off / auto.

    • Input your location Latitude and Longitude.

  • Select your location from the map by tapping Select from map.

  • Enable automatic detection by tapping Auto detect location. You may also set automatic detection by marking the checkbox at the top of this section.

Tap Save to save any changes made.

Device Name

Change the current device name. This will reflect on the Shelly Device name in the settings. Tap Save to save any changes made.

Channel Name

Change the current channel name. Tap the toggle to sync channel name. This will reflect on the Shelly Device name in the application if “Sync name” is enabled. The sync is only from the application to the device and not vice-versa. Tap Save to save any changes made.

Erase data

Tap Delete to erase all data saved on this device.

Factory Reset

Tap the toggle button to enable factory reset by power cycle. By enabling this setting, you can reset the Shelly Device by 5 quick successive power cycles.

Reset your Shelly Device to its factory settings by tapping Factory reset. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device reboot

Tap Reboot to reboot your Shelly Device.

Device Information

Here you can view the Shelly Device ID, Device IP, and Device Type, and other device information. Tap the clipboard icon to copy the desired information. Tap Delete to delete this Shelly Device from your account.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close