Shelly Vintage Device Smart Control

Main Controls

Below the Main Controls heading, observe the current Shelly Device power consumption in Watts, and brightness as a percentage, and whether or not the Shelly Device is active. Adjust the Shelly Device brightness by dragging the slider up and down to your desired percentage.

The power button ⏻ is at the bottom of this tab. Click the power button ⏻ to turn your device On/Off. Your device is on when there is a blue ring around the power button ⏻, and is off when the ring is gray.

Charts

Consumption

Observe a chart with the Shelly Device consumption displayed in Watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown. Click on the expand icon in the top right corner of the Consumption rectangular box if you wish to view the chart in full screen. Click the Export CSV button to download this data as a CSV file.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off.

Timer

In this tab, you can set a timer to manage the device on/off state.

1. Choose from the following options:

• Auto on: Enter the number of seconds that should pass for the device to be switched on after it has been turned off. Mark the empty checkbox to enable the timer.

• Auto off: Enter the number of seconds that should pass for the device to be switched off after it has been turned on. Mark the empty checkbox to enable the timer.

2. Tap Save to confirm the setting.

Schedule

Click the Add schedule button to create a schedule. Create a weekly schedule for the day(s) and time(s) you want the corresponding device to turn On/Off automatically. You may add up to 20 weekly schedules. This function requires a working connection to the Internet.

• Select the day(s) of the week, and then click the NEXT button.

• Choose time interval: Time, or Sunrise / Sunset.

• Set the time for the specified day(s):

  • Time: Click up/down button, or type in a number, to set a time in hours and minutes.

  • Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.

• Select action:

  • Set the action as on / off / select brightness.

  • If you set select brightness as the action, select brightness by clicking and dragging the slider to set the brightness as a percentage.

• Click the Save button to save the schedule.

Once the schedule has been created, it will appear as a rectangular box on the main Schedule page for the Shelly Device. On this box, you can see the schedule details such as the days of the week, action and time. You can enable/disable schedules by clicking the toggle button at the top of this tab. You can edit the schedule by clicking on the edit pencil icon on the right, and delete the schedule by clicking the trash icon on the right.

Night Mode

Click the checkbox to enable night mode. Once enabled, click the edit icon to edit the active night mode. Choose the time interval start and end time by clicking the up/down button, or typing in a number, to set a time in hours and minutes. Click the Next button. Select the brightness by clicking and dragging the slider to set the brightness as a percentage. Click the Save button to save any changes made.

Actions

Use events to trigger http endpoints. Click the edit button of the webhook you wish to activate. Add up to 5 URLs per webhook, which will be executed one after the other. Click the save button once you have added your URLs. Once you have added URLs to execute, click the toggle button to the left of the action to enable it.

Add URLs to the following actions:

• Output On

• Output Off

This function requires a working connection to the Internet. Please note that more than two actions per webhook can affect the normal operation of the device depending on the network infrastructure and controlled devices.

Networks

Wi-Fi

Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other.

Access Point

Enable to configure Shelly Device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.

Restrict login

Restrict the web interface of the Shelly Device with a username and password. Click the checkbox to enable this function. Click the APPLY button to apply changes made.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices.

Application Settings

Consumption Calculation

Click the corresponding toggle button to enable/disable exclusion of device from total room/account consumption.

Pin Lock

Enable/disable and set a channel pin lock.

Sync Name

Keep the device name in sync with the name given in the app.

Exclude From Event Log

Click the toggle button to enable/disable event log reports for this device.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and click the Remove from my account button if you wish to delete it from your account.

Settings

Eco Mode

Click the checkbox to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Power On Default

Select from the following:

• On: Configure Shelly Device to turn on when it has power.

• Off: Configure Shelly Device to turn off when it has power.

• Restore last mode: Configure Shelly Device to restore the last mode it was in when it has power.

Click the Save button to save any changes made.

Transition Time

Set the transition time between 0 and 5000 milliseconds.

Firmware Update

Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the Update button.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

• Select it manually by choosing your Time zone from the dropdown menu.

• Select your location from the map by clicking Select from map button.

• Enable automatic detection by clicking the Auto detect location button.

Device Name

Set a name for your device.

Factory Reset

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Reboot

Reboot your Shelly Device.

Device Information

Here you can view the Shelly Device ID, IP and other device settings.