Shelly Button 2 Device Smart Control
Main Controls
Across the top of this page, observe the Shelly Device battery as a percentage, and the date and time the Shelly Device was last active.
Notifications
If you have Shelly Device notifications, they will appear on this tab.
Activity log
Observe the recorded history of the Shelly Device events. See the date, time and type of action executed.
Actions
Use events to trigger http endpoints. Click the edit button of the webhook you wish to activate. Add up to 5 URLs per webhook, which will be executed one after the other. Click the save button once you have added your URLs. Once you have added URLs to execute, click the checkbox to the left of the webhook to enable it.
Add URLs to the following webhooks:
Short push
Long push
Double short push
Triple short push
This function requires a working connection to the Internet. Please note that more than two actions per webhook can affect the normal operation of the device depending on the network infrastructure and controlled devices.
Networks
Wi-Fi
Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other.
Access Point
Click the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi AP, to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access.
Restrict Login
Click the checkbox to restrict the web interface of the Shelly Device with a Username and Password.
Cloud
Click the toggle button to connect the Shelly Device to the cloud. This allows you to control it remotely, and receive notifications and updates about your devices.
Application Settings
Exclude From Event Log
Click the checkbox to disable event log reports for this device.
Sync Name
Click the checkbox to keep the device name in sync with the name given in the app.
Share
Input an email and share control of the Device with another Shelly Cloud user. The other user will only have access to the Device's power button (on/off), and be able to see the Device Information. The other user cannot see the other device settings.
Settings
Long Push
Set a max time (between 800 - 2000 ms) to register as a long push in milliseconds.
Multi Push
Set a max time (between 200 - 2000 ms) between pushes to register as a multi push in milliseconds.
Remain Awake
Set a time (between 0 - 5) in seconds for the button to sleep after a button push.
LED Status Disable
Click the checkbox to enable/disable Wi-Fi status LED.
Firmware Update
Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the Update
button.
Geo Location And Time Zone
Set your time zone and geo-location in one of three ways:
Select it manually by choosing your Time zone from the dropdown menu.
Select your location from the map by clicking
Select from map
button.Enable automatic detection by clicking the
Auto detect location
button.
Device Name
Set a name for your device.
Factory Reset
Reset your Shelly Device to its factory settings by clicking the Factory reset
button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.
Device Reboot
Reboot your Shelly Device by clicking the Reboot
button.
Device Information
Here you can view the Shelly Device ID, IP and other device settings.