Shelly Gas Device Smart Control

Main Controls

Below the Main Controls heading, observe the gas concentration value in ppm, the last date and time gas was sensed, and whether the valve is open or closed.

A chart shows the measured gas concentration in ppm of the last 24 hours. Below the chart is mute button for the alarm sound, and the status of whether or not gas has been detected.

Charts

PPM

Observe a chart that shows the measured gas concentration in ppm. Above the PPM chart, you can select the time interval and the date from which you want data to be shown. The data shown by the green line is the current consumption by the Shelly Device. Click on the expand icon in the top right corner of the PPM rectangular box if you wish to view the chart in full screen. Click the Export CSV button to download this data as a CSV file.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as whether or not gas was sensed.

Valve control

Click the Close valve button to close the valve.

Sensor self test

Click the Self test button to complete a self test.

Actions

For each possible condition, check the toggle button to enable the condition. Click the edit icon, and input up to 5 URLs in order to trigger http endpoints. Click the save button once you have added your URLs. Click the Save button to save any changes made. Possible conditions are:

• Alarm off

• Alarm mild

• Alarm heavy

This function requires a working connection to the Internet. Once the action has been created, it will appear as a rectangular box on the main I/O actions page for the Shelly Device. You can enable/disable an action by click the toggle button to the left of the action box. You can edit the action by clicking on the edit pencil icon on the right, and delete the action by clicking the trash icon on the right.

Application Settings

Exclude From Activity Log

Click the checkbox to disable event log reports for this device.

Sync Name

Keep the device name in sync with the name given in the app.

Networks

Wi-Fi

Register the Shelly device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and the Shelly device disconnects from one of the networks, it will connect to the other.

Access Point

Enable to configure the Shelly device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.

Wi-Fi AP Roaming

Click the Enable checkbox. Set the RSSI signal strength value below which the device will periodically scan for a better access point. Set a value between -50 to -90. Click the APPLY button to apply any changes made.

Restrict Login

Restrict the web interface of the device with a username and password. Click the APPLY button to apply any changes made.

Cloud

Click the checkbox to enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Click the APPLY button to apply any changes made.

Share

Input an email and share control of the Device with another Shelly Cloud user. The other user will only have access to the Device's power button (on/off), and be able to see the Device Information. The other user cannot see the other device settings.

Settings

Eco Mode

Click the toggle button to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Volume

Select the alarm volume from the dropdown menu. Choose a value from 1 to 11.

Firmware Update

Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the Update button.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

• Select it manually by choosing your Time zone from the dropdown menu.

• Select your location from the map by clicking Select from map button.

• Enable automatic detection by clicking the Auto detect location button.

Device Name

Set a name for your device.

Factory Reset

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Reboot

Reboot your Shelly Device.

Device Information

Here you can view the Shelly Device ID, IP and other device settings.