TopAC portable EV charger EVE01-11R

TopAC_Portable_EV_charger.png

Device identification

Device type: Portable EVSE

Device model: EVE01-11R

Main features

  • Auto balance (dynamic load management)

  • Adjustable output current (6 - 16 A)

  • Built-in electrical protection

  • Ingress protection: IP65 for the control box

  • No hub required

  • Home and travel-ready

Connectivity

  • Wi-Fi

  • Bluetooth

Specifications

Specification

Value

Model

EVE01-11R

Power Supply

(3P + N + PE), 380-400V AC, 50/60Hz

Power Plug

CEE Plug (3 Phase, 16A) with NTC

Selectable Current

6A to 16A

Rated Power

Up to 11kW

Input Plug Cable

5x2.5mm² + 2x0.5mm²

Charging Cable

5x2.5mm² + 1x0.5mm²

Cable Material

TPU Rubber

Vehicle Connector

Type 2

Start Mode

Shelly Smart Control app

Ingress Protection

IP65

Total Product Length

5.6 meters

RCD Type

Type A (30mA AC) + 6mA DC

Safety Protection

CP Diode Short Circuit Protection, Surge protection Relay Adhesion Protection, Over current protection, Over/under voltage protection, Ground protection, Over temperature protection, Current Leakage protection

Mating Cycles

Plug in / Pull out > 10 000 times

Earthing System

TN-C, TN-S

Certificate

CE, RoHS

Test Standard

EN IEC 62752, EN IEC 62196, EN 50620 / IEC 62893

Impact Protection

IK08

Working Temperature

-25 °C to 45 °C

Working Altitude

< 2 000 meters

Working Humidity

5% to 95% (no condensation)

Power supply requirements

Recommended cable cross-section

3-phase 11kW, 16A per phase: 4mm²
(Based on max. 50m cable length)

Short-circuit Protection

Circuit Breaker:
3-phase 16 A:
1x20 A, 3P, type B or C

Fuse:
3-phase 16 A:
3x20 A gG

Rated voltage

3-phase: 3x220/380V-3x240/415V AC

Safety functions

  • Over-voltage protection

  • Under-voltage protection

  • Over-current protection

  • Over-temperature protection

  • Leakage current protection

  • Short-circuit protection

Components overview

overview.png
  1. Power outlet

  2. Power plug

  3. Portable EV charger

  4. Control panel

  5. Type 2 charging connector

  6. Vehicle charging socket

Auto balance

Auto balance manages charging current based on total system consumption, ensuring it does not exceed a preset Total current limit, with a 2A safety reserve included.
Auto balance has two modes, depending on whether the portable charger is monitored by the energy meter or not. In the default mode, the portable charger is part of the monitored electrical system.
Requires a Shelly EM device of Gen2, Pro, or newer installed and connected to the same Wi-Fi network.

Shelly Smart Control

Adding the device to Shelly Smart Control

Shelly Web user interface

Accessing local web interface

Compliance

EVE01-11R multilingual EU declaration of conformity.pdf

Printed user guide

EVE01-11R user manual.pdf

EVE01-11R Bruks- och säkerhetsanvisning.pdf

EVE01-11R Käyttö- ja turvallisuusohje.pdf

Disposal and recycling

Do not dispose of the product in household waste. Recycle the product to prevent environmental and health damage and to promote resource conservation. Dispose of the product at an appropriate waste collection point at your own responsibility.

Resellers, from which the Device was purchased, are required to accept Waste Electrical and Electronic Equipment (WEEE) free of charge for proper disposal.

Some electronic products may store personal data. The user is responsible for deleting this data before disposing of the Device. For deletion, reset the device to its factory settings.

Manufacturer

ZHEJIANG GUANGWEI ELECTRIC & TOOLS CO., LTD

Address: NO.55th Lingxiu RD., Luoxing Str., Jiashan County, Jiaxing City, Zhejiang, P.R. China

E-mail: s15@guangwei-china.com

Website: http://www.acdctop.com

Importer

Shelly Europe Ltd.

Address: 51 Cherni Vrah Blvd., bldg. 3, fl. 2-3, Sofia 1407, Bulgaria,

Email: support@shelly.cloud

Website: https://www.shelly.com