EVPC02-22W Wall charger

PBS_TopAC 22kW Wall Charger.jpg

Device identification

Device type: Mode 3 EVSE (wall box)

Device model: EVPC02-22W

Main features

  • Auto balance (dynamic load management)

  • Adjustable output current (6 - 32 A)

  • Built-in electrical protection

  • Ingress protection: IP65 Wall box / IP65 Plug, mated / IP55 Plug, unmated

  • Type 2 vehicle connector

Product overview

evpc02-22w overview kb.svg

Legend:

  1. LED status bar

  2. Display

  3. Touch button

  4. Charging connector holder

  5. Power cord entry

  6. Ethernet port

  7. Charging connector cord entry

Device electrical interfaces

  • Ethernet port

Connectivity

  • Wi-Fi

  • Bluetooth

  • Ethernet

Power supply options

  • Single-phase, 220 – 240 VAC, 32 A - up to 7.4 kW

  • Three-phase, 3x220/380 to 3x240/415 VAC, 32 A - up to 22 kW

The wall charger is designed for a three-phase power supply. A single-phase supply is also supported, but with reduced output and longer charging times. For best performance, use a three-phase supply.

Safety functions

  • CP diode short circuit protection

  • Surge protection

  • Relay adhesion protection

  • Over current protection

  • Over/under voltage protection

  • Ground protection

  • Over temperature protection

  • Current leakage protection

User interface

  • Touch button

  • 3.5" LCD screen

Specifications

Specification

Value

Model

EVPC02-22W

Power supply

3P + N + PE

Rated voltage

380 - 400 VAC

Power Input

Hardwired

Nominal frequency

50/60 Hz

Max. output current

32 A

Rated power up to

22 kW

Vehicle connector

Type 2

Cable length

5 meters

Weight

5.5 kg

Output cable

5 x 6.0 mm² + 1 x 0.5 mm²

Display

LED strip + 3.5" LCD screen

Start mode

Automatic (default) / Shelly Smart Control App

Ingress protection

IP65 Wall box / IP65 Plug mated / IP55 Plug unmated

Safety class

Class I

RCD

Type A (30 mA AC) + 6 mA DC

Safety

CP Diode short-circuit protection, Surge protection Relay adhesion protection, Overcurrent protection, Over/under voltage protection, Ground protection, Overtemperature protection, Current leakage protection

Load balance

Shelly EM Gen 2, Pro, or newer

Enclosure material

Plastic PC

Installation

Wall-mounted / Pole-mounted

Certificate

CE, RoHS

Test standard

EN IEC 61851, EN IEC 62196, EN 50620 / IEC 62893

Earthing system

TN-C, TN-S

Impact protection

IK08

Operating temperature

-25 °C to 45 °C

Humidity

5% to 95% RH (non-condensing)

Power supply requirements

Recommended cable diameters (Based on max. 50 m cable length)

1-phase 7.4 kW, 32 A per phase: 6mm²
3-phase 22 kW, 32 A per phase: 6mm²

Short-circuit protection

Circuit Breaker:
1-phase 32 A: 1x40 A, 1P, type B or C
3-phase 32 A: 1x40 A, 3P, type B or C

Fuse:
1-phase 32 A: 1x35 A gG
3-phase 32 A: 3x35 A gG

Rated voltage

1-phase: 220 - 240 VAC
3-phase: 3x220/380 V - 3x240/415 VAC

Auto balance

Auto Balance automatically adjusts the charging current based on the energy meter’s measurements to ensure the total current used by all connected appliances does not exceed the maximum set in Total current limit. The calculations include a default 2 A safety reserve, which may be adjusted in the range from 0 to 4 A.

Shelly Smart Control

Adding the device to Shelly Smart Control

Shelly web user interface

Accessing local web interface

Disposal and recycling

Do not dispose of the product in household waste. Recycle the product to prevent environmental and health damage and to promote resource conservation. Dispose of the product at an appropriate waste collection point at your own responsibility.

Resellers, from which the Device was purchased, are required to accept Waste Electrical and Electronic Equipment (WEEE) free of charge for proper disposal.

Some electronic products may store personal data. The user is responsible for deleting this data before disposing of the Device. For deletion, reset the device to its factory settings.

Printed user guide

evps02-22w user manual multilingual v3.2.pdf

Manufacturer

ZHEJIANG GUANGWEI ELECTRIC & TOOLS CO., LTD

Address: NO.55th Lingxiu RD., Luoxing Str., Jiashan County, Jiaxing City, Zhejiang, P.R. China

E-mail: s15@guangwei-china.com

Website: http://www.acdctop.com

Importer

Shelly Europe Ltd.

Address: 51 Cherni Vrah Blvd., bldg. 3, fl. 2-3, Sofia 1407, Bulgaria,

Email: support@shelly.cloud

Website: https://www.shelly.com