Shelly Flood Gen4 Device Smart Control
Main Controls
In this tab, you can view the following information:
The device battery level in percentage
No, Flood, or Rain - this is visual indication showing whether the device detects nothing, flood or rain
Notifications
In this tab, you can view all the device notifications that you have received.
Activity log
In this tab, you can view the history of your Shelly Flood Gen4 events. The following data is available: each button push, flood/rain detection, etc.
Sensor settings
In this tab, you can choose:
Alarm mode - Select between the following alarm modes:
Rain mode - if the device detects rain, no alarm is activated
Flood mode - select one of the following flood alarm modes: Intense, Normal, or Economic.
State hold time - adjust the slider to define the duration (in seconds) for which the flood state is maintained before triggering the alarm.
Actions
In this tab, you can set conditions related to Shelly Flood Gen4 that, if fulfilled, can trigger different actions.
Create action
Tap the Add action button.
Enter action name. Tap Next to continue.
Set a condition specifying the following details:
When - select the event that triggers the action:
Flood alarm- flood is detected
Flood alarm off - no flood is detected
Tap Next to continue further.
Select what type of actions will be triggered. You have the following options:
Actions - here you can add actions by entering URL links or by tapping the button Add action from another device. Tap Save to add the action.
Tap Save to create the action.
Example:
Condition: Flood alarm
In this case, the action will be triggered when the flood alarm is activated.
Networks
In this tab, you can specify the settings for different network connections.
Wi-Fi 1 and Wi-Fi 2
In this sub-tab, you can:
Mark the Enable checkbox and connect your device to up to two different Wi-Fi networks. Enter the Wi-Fi manually or scan for the available Wi-Fi networks. The Open network checkbox is marked automatically if the network that you have selected is open.
Set static IP address by marking the checkbox and filling in the required information.
You can enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If the device disconnects from one of the networks, it will automatically connect to the other. Tap Save to save your changes.
Access point
Mark the Enable checkbox to create a Wi-Fi Access Point (AP) of Shelly Flood Gen4. Set a password to protect the AP from unauthorized access. Mark the checkbox if you want the AP to be an open network. Tap Save to save your changes.
Outbound websocket
Mark the checkbox to enable SSL connectivity. Select the type of SSL connectivity from the dropdown menu and enter the server address. Tap the Save button to save any changes made.
NOTE: Keep in mind that changing these settings requires a device reboot.
RPC over UDP
Enter the destination address and port. Then, input the listening port. Tap the Save button to save any changes made.
Cloud
Tap the Enable toggle to connect the device to its cloud. By enabling this setting, you can control it remotely and receive notifications and updates.
To disable the cloud connection, tap the toggle again. Tap Confirm in the message that appears.
Bluetooth
Mark the Enable checkbox. Tap the toggle switch to enable the RPC/Bluetooth gateway.
MQTT
Mark the checkbox to enable MQTT. Configure the device to execute actions via MQTT.
NOTE: Keep in mind that changing the MQTT settings requires a device reboot.
Choose the connection type from the following options:
RPC status notifications over MQTT
Generic status update over MQTT
SSL connectivity
Enter the MQTT prefix, the desired server, and the client ID.
Enter the username and password.
Tap the Save button to save any changes made.
Application settings
In this tab, you can specify the main application settings, such as device card appearance, activity log, device usage, etc.
Offline notifications
Tap the toggle next to each of the following notification types to enable them:
Enable offline email notifications.
Enable offline push notifications.
Device note
In this tab, you can leave a note about the device.
Device usage details
In this tab, you can view in which room, channel, dashboard, etc., the device is used.
Device Card customization
You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app.
Tap Customize device card. There are 2 types of slots that you can configure:
Big Parameter slot: Choose between:
Flood/Rain - indicates if there is a flood or rain
Battery - indicates the battery level in percentage
Small Parameter Slot: Here you can remove or add parameters that will be displayed in the small parameter slot.
Tap Save to save the changes.
Exclude From Activity Log
Tap the toggle to exclude your Shelly Flood Gen4 from the global activity log.
Share
In this tab, you can share part of the control of your device with another Shelly Smart Control app user:
Enter the e-mail of the user.
Tap Share.
The other user will only have access to the following tabs: Main Controls, Notifications, Application Settings, and Device Information in the Settings tab.
Settings
In this tab, you can view and change the main settings of the device, such as name, geolocation and time zone, etc.
Device Name
You can change the current device name. If you use the Sync device name toggle to enable the synchronization, the name will also be changed in the device web interface. Tap Save to save the changes.
Firmware versions
Choose from the following options:
Update: By tapping this button, you can get the latest stable firmware version.
Check for update: By tapping this button, you can check if your firmware version is up-to-date.
Geo Location And Time Zone
In this tab, you can:
Mark the checkbox next to Automatically detect time-zone and Geo location. In this case there is no need to enter any information manually.
Enter your Time zone (specify Daylight saving time), Latitude, and Longitude.
Tap the option Select from map and put the marker in the location. Tap Select to confirm it.
Tap the Auto detect location. As a result, the location data is auto-populated in the respective fields.
Tap Save to save any changes made.
Factory Reset
Reset your device to its factory settings by tapping the Factory Reset button. This will disconnect the device from your Wi-Fi network, and all associated users, including you, will be removed from the bulb. All previously set data will be deleted.
Device Reboot
Tap the Reboot button to reboot your device.
Device Information
Here you can view the Device ID, Device Mac, Device IP, Device Type, etc. You can choose between the following options:
Transfer - tap here if you want to transfer your device to another of your accounts. You are able to use this option only if, at the time of transferring the device, you are also logged in to the other account.
Delete - tap here if you want to remove the device from your account