Skip to main content
Skip table of contents

How to add BLU Gateway Gen3 to the Shelly Smart Control cloud application

  • The distance between the Gateway and your router should be less than 30 m.

  • The Gateway requires at least 500 mA to operate.

  • The Gateway works only with 2.4 GHz Wi-Fi networks.

Prerequisites

Before you start, make sure you have:

Installation

  1. Power up the Gateway by plugging it into a standard USB type A port. The LED indicator lights up in blue showing that the device is in Access Point mode.

Adding Shelly-BLU-Gateway-G3-to-Shelly cloud-web-v.1.0.png

BLE-pairing-mode-Gateway-Gen3-web-v.1.0.png
  1. Open the Shelly Smart Control app on your mobile device.

  2. Select (plus) at the lower-right corner of the screen.

  1. Select Add via Bluetooth, then select Next.

  1. Select Shelly Bluetooth Gateway Gen3, then select Next.

  1. Select the Wi-Fi network for connecting the Gateway, then select + Add device.

The LED indicator lights up in red showing that the device is connecting to the Shelly cloud.

If you have previously added devices and saved the network password, a message will appear asking you to confirm if you want to connect the new device to the same Wi-Fi network. If you want to change the network, select Edit .

  1. Name the Device and select a picture. Then, select Next.

  1. Add the Gateway to a room of your preference. Alternatively, create a new room and then select Save.

The Device is now added to your account.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.