Skip to main content
Skip table of contents

Shelly 1L web interface guide

To connect to your Shelly 1L, connect your device to the Wi-Fi network with a name(SSID) like shelly1l - 84CCA87D7CDC. Use the universal IP address for all Shelly devices - 192.168.33.1 to access your device's Web Interface, where you can set a Wi-fi network for the Shelly 1L to connect to. Once done, through the app on your mobile device or through home.shelly.cloud, you can go into the Settings and search for Device information. There you will find the Device IP and be taken to the Web Interface of Shelly 1L.

General - Home page

In the web interface, you will see three icons at the top of the screen, including one for Wi-Fi and Cloud connection, as well as an icon indicating the state of the web interface(passwords protected or not). Here is what the different status colors mean:

  • Wi-Fi icon:

    • Red: Wi-Fi connection is disabled.

    • White: Wi-Fi connection is enabled, but not established.

    • Green: Device is connected to Wi-Fi.

  • Cloud icon:

    • Red: Connection to Shelly Cloud is disabled.

    • White: Connection to Shelly Cloud is enabled, but not established.

    • Green: Device is connected to Shelly Cloud.

  • Lock icon:

    • Red: The web interface of your device is not password protected.

    • Green: The web interface of your device is password protected.

In the home page of the Web Interface, you will see a power button on the right side of your screen, which you can use to turn the switch on and off. In the middle is a button “CLICK TO SET”. When you click on the text you will be taken to the POWER CONSUMPTION setting.

Timers

Allows you to manage the power supply automatically. You may use:

  • Auto on: After turning off, the relay output will be automatically turned on after a predefined period of time (in seconds).

  • Auto off: After turning on, the relay output will be automatically turned off after a predefined period of time (in seconds).

Weekly schedule

This function requires a working connection to the Internet, so the device can synchronize the time. It allows you to create, view, edit, and delete schedules.

To create a schedule:

  • Select the day(s) of the week.

  • Choose a time interval: time, sunrise, or sunset.

  • Set the time for the specified day(s):

    • Time: Click the up/down button, or type in a number, to set a time in hours and minutes.

    • Sunset/Sunrise: The Shelly device may turn on/off (or do specified action) automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset. Click the up/down button, or type in a number, to set a time in hours and minutes.

Internet & Security

WI-FI MODE - CLIENT

In this setting, you can connect your Shelly 1L to your home network by selecting a Wi-Fi network and typing in its password. Enable Wi-Fi Client only, or both Wi-Fi Client and Wi-Fi Client Back-up. If both are enabled, and the Shelly device disconnects from the first network, it will connect to the other one. When connecting your device to your home network, you can also set a static IP address for your device to acccess it at.

WIFI CLIENT - AP ROAMING

Enabling this setting will make it so the device periodically scans for a better access point when the RSSI signal strength value is below the one you have chosen from the drop-down menu.

Access point

Configure the device's AP, including switching it on or off, and setting a password. The access point of the device is an open network by default. The SSID is unique and cannot be changed.

RESTRICT LOGIN

Once you’ve enabled this setting, you will type in a username and password, which will be used as login credentials every time you visit the device’s Web UI. This setting is responsible for the lock icon in the home page of the web interface and when it’s enabled the icon will be green and the lock will be closed.

SNTP SERVER

SNTP synchronizes your device's system time with a server that has already been synchronized by another source. There is already a set server, which is the default one - http://time.google.com, however, if there are any problems, you can easily change it and enter a new one in the text box. Changing this setting will reboot the device.

ADVANCED - DEVELOPER SETTINGS

In this setting, you can enable/disable Cross-Origin Resource Sharing, CoIoT and MQTT. If you enable CoIoT, a text box will appear, where you can type in the CoIoT peer. There you can enter mcast for multicast or ip:port for unicast. A device is required when the CoIoT peer is changed.

You can also enable MQTT, but actions via Cloud connection will be disabled.

CLOUD

Connecting your Shelly to its cloud allows you to control it remotely, and receive notifications and updates about your devices. The default for this setting is for the cloud to be enabled. If you disable the device cloud support, you will lose connection to your device from outside its local network!

I/O URL Actions

Configure the actions for your device - enable, disable, add duration and URLs.

Settings

POWER ON - DEFAULT MODE

Set relay power on default:

  • On: (Button and Switch) - Configure Shelly device to Turn ON, when it has power.

  • Off: (Button and Switch) - Configure Shelly device to Turn OFF, when it has power.

  • Restore last: (Button and Switch) - Configure Shelly device to Restore the last mode it was in, when it has power.

  • Match input: (Switch only) - Operates the Shelly device according to the state of the switch or button connected to the device

For this device, Match input includes two switch settings - SWITCH 1 and SWITCH 2.

APPLIANCE TYPE

Select or enter a custom type of the appliance your device is connected to. To save the changes, click Save.

BUTTON 1 TYPE

Set relay type:

  • Follow: (Switch only) - Set Shelly device to be Toggle switch. Act as a flip switch with one state for ON and one state for OFF.

  • Momentary: (Button only) - Set Shelly device to be Momentary switch. Push for ON or Push for OFF.

  • Flip: (Switch only) - Set Shelly device to be Edge switch. Changes state on every hit.

  • Detached: (Button and Switch) - Set Shelly device to be in Detached switch mode - switch is separated from the relays.

  • Reverse input - Invert the On/Off position, aka the device will consider the switch to be on when it is off and vice versa.

BUTTON 2 TYPE

Set relay type:

  • Follow: (Switch only) - Set Shelly device to be Toggle switch. Act as a flip switch with one state for ON and one state for OFF.

  • Momentary: (Button only) - Set Shelly device to be Momentary switch. Push for ON or Push for OFF.

  • Flip: (Switch only) - Set Shelly device to be Edge switch. Changes state on every hit.

  • Detached: (Button and Switch) - Set Shelly device to be in Detached switch mode - switch is separated from the relays.

  • Reverse input - Invert the On/Off position, aka the device will consider the switch to be on when it is off and vice versa.

SWAP INPUTS

When enabled, button 1 and button 2 will be swapped.

LED LIGHT CONTROL

Enabling this setting will disable the Wi-Fi status light inside of the device and it won’t indicate the device’s status.

FIRMWARE UPDATE

The device can check for new firmware and you can choose to update it if a new version is available.

TIME ZONE AND GEO-LOCATION

Your timezone and location will be autodetected, but you can manually change them from this setting by choosing a timezone from the drop-down menu and typing in your latitude and longitude. There is also a button Auto detect location, which will make the device automatically detect the location once again if it failed the previous time.

DEVICE NAME

Name/Rename your device.

CHANNEL NAME

Set a name for / Rename the channel.

FACTORY RESET

Factory resetting the Shelly device will bring it back to its factory settings, disconnect it from all Wi-Fi networks and all associated users, including you, will be removed from the device.

Before you can control the device again, you’ll have to add it to your account again as a new device.

DEVICE REBOOT

Reboot your device.

DEVICE DISCOVERABLE

Make your device discoverable by other devices.

Eco mode

Reduce the energy consumption of your device by lowering the CPU frequency and modem activity. Enabling Eco Mode can help you conserve power and extend the battery life of your device.

To enable Eco Mode, simply toggle the switch next to "Enable Eco Mode." Once you've done that, click the "Apply" button to save the changes. Your device will then automatically adjust its CPU frequency and modem activity to reduce power consumption.

POWER CONSUMPTION

Shelly 1L has no power measurement capabilities but you can tell Shelly 1L the power of the connected appliance, so that its energy consumption is added to the statistics when the appliance is turned on. To save the changes you made, click Save.

LONG PUSH TIME

In this setting, you can customise the time it takes for the device to register and recognise a long push. There is a default time. but you can change it by ticking the box next to Use custom time.

DEVICE INFO

See information about your device, including the device ID, the Wi-Fi network it’s connected to, the RSSI of the Wi-Fi and the debug log. Enabling the debug log without a reason isn’t recommended, since your device will be slowed down and this setting will cause aging of the flash memory. If you do decide to enable it, you can also download the previous and current logs.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.