Shelly 1PM web interface guide
To connect to your Shelly 1PM, connect your device to the Wi-Fi network with a name(SSID) like shelly1pm - 84CCA87D7CDC. Use the universal IP address for all Shelly devices - 192.168.33.1 to access your device's Web Interface, where you can set a Wi-fi network for the Shelly 1PM to connect to. Once done, through the app on your mobile device or through home.shelly.cloud, you can go into the Settings and search for Device information. There you will find the Device IP and be taken to the Web Interface of Shelly 1PM.
General - Home page
In the web interface, you will see three icons at the top of the screen, including one for Wi-Fi and Cloud connection, as well as an icon indicating the state of the web interface(passwords protected or not). Here is what the different status colors mean:
Wi-Fi icon:
Red: Wi-Fi connection is disabled.
White: Wi-Fi connection is enabled, but not established.
Green: Device is connected to Wi-Fi.
Cloud icon:
Red: Connection to Shelly Cloud is disabled.
White: Connection to Shelly Cloud is enabled, but not established.
Green: Device is connected to Shelly Cloud.
Lock icon:
Red: The web interface of your device is not password protected.
Green: The web interface of your device is password protected.
In the home page of the Web Interface, you will see a power button on the right side of your screen, which you can use to turn the switch on and off. The power consumption is also displayed in the home page.
Timers
Allows you to manage the power supply automatically. You may use:
Auto on: After turning off, the relay output will be automatically turned on after a predefined period of time (in seconds).
Auto off: After turning on, the relay output will be automatically turned off after a predefined period of time (in seconds).
Weekly schedule
This function requires a working connection to the Internet, so the device can synchronize the time. It allows you to create, view, edit, and delete schedules.
To create a schedule:
Select the day(s) of the week.
Choose a time interval: time, sunrise, or sunset.
Set the time for the specified day(s):
Time: Click the up/down button, or type in a number, to set a time in hours and minutes.
Sunset/Sunrise: The Shelly device may turn on/off (or do specified action) automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset. Click the up/down button, or type in a number, to set a time in hours and minutes.
Internet & Security
WI-FI MODE - CLIENT
In this setting, you can connect your Shelly 1PM to your home network by selecting a Wi-Fi network and typing in its password. Enable Wi-Fi Client only, or both Wi-Fi Client and Wi-Fi Client Back-up. If both are enabled, and the Shelly device disconnects from the first network, it will connect to the other one. When connecting your device to your home network, you can also set a static IP address for your device to acccess it at.
Access point
Configure the device's AP, including switching it on or off, and setting a password. The access point of the device is an open network by default. The SSID is unique and cannot be changed.
RESTRICT LOGIN
Once you’ve enabled this setting, you will type in a username and password, which will be used as login credentials every time you visit the device’s Web UI. This setting is responsible for the lock icon in the home page of the web interface and when it’s enabled the icon will be green and the lock will be closed.
SNTP SERVER
SNTP synchronizes your device's system time with a server that has already been synchronized by another source. There is already a set server, which is the default one - http://time.google.com, however, if there are any problems, you can easily change it and enter a new one in the text box. Changing this setting will reboot the device.
ADVANCED - DEVELOPER SETTINGS
In this setting, you can enable/disable Cross-Origin Resource Sharing, CoIoT and MQTT. If you enable CoIoT, a text box will appear, where you can type in the CoIoT peer. There you can enter mcast for multicast or ip:port for unicast. A device is required when the CoIoT peer is changed.
You can also enable MQTT, but actions via Cloud connection will be disabled.
CLOUD
Connecting your Shelly to its cloud allows you to control it remotely, and receive notifications and updates about your devices. The default for this setting is for the cloud to be enabled. If you disable the device cloud support, you will lose connection to your device from outside its local network!
Safety
MAX POWER PROTECTION
Configure the Shelly switch relay to turn off when power consumption reaches a certain value. The range is 1 W - 3500 W. Maximum allowed power value is equal to maximum current times maximum voltage.
Actions
Configure the actions for your device - enable, disable, add duration and URLs. This setting includes these actions: BUTTON SWITCHED ON URL, BUTTON SWITCHED OFF URL, OUTPUT SWITCHED ON URL, OUTPUT SWITCHED OFF URL.
Settings
POWER ON - DEFAULT MODE
Set relay power on default:
On: (Button and Switch) - Configure Shelly device to Turn ON, when it has power.
Off: (Button and Switch) - Configure Shelly device to Turn OFF, when it has power.
Restore last: (Button and Switch) - Configure Shelly device to Restore the last mode it was in, when it has power.
Match input: (Switch only) - Operates the Shelly device according to the state of the switch or button connected to the device
For this device, Match input includes one switch setting - SWITCH.
BUTTON TYPE
Set relay type:
Follow: (Switch only) - Set Shelly device to be Toggle switch. Act as a flip switch with one state for ON and one state for OFF.
Momentary: (Button only) - Set Shelly device to be Momentary switch. Push for ON or Push for OFF.
Flip: (Switch only) - Set Shelly device to be Edge switch. Changes state on every hit.
Detached: (Button and Switch) - Set Shelly device to be in Detached switch mode - switch is separated from the relays.
Reverse inputs - Invert the On/Off position, aka the device will consider the switch to be on when it is off and vice versa.
FIRMWARE UPDATE
The device can check for new firmware and you can choose to update it if a new version is available.
TIME ZONE AND GEO-LOCATION
Your timezone and location will be autodetected, but you can manually change them from this setting by choosing a timezone from the drop-down menu and typing in your latitude and longitude. There is also a button Auto detect location, which will make the device automatically detect the location once again if it failed the previous time.
FACTORY RESET
Factory resetting the Shelly device will bring it back to its factory settings, disconnect it from all Wi-Fi networks and all associated users, including you, will be removed from the device.
Before you can control the device again, you’ll have to add it to your account again as a new device.
DEVICE REBOOT
Reboot your device.
DEVICE INFO
See information about your device, including the device ID, the Wi-Fi network it’s connected to, the RSSI of the Wi-Fi and the debug log. Enabling the debug log without a reason isn’t recommended, since your device will be slowed down and this setting will cause aging of the flash memory. If you do decide to enable it, you can also download the previous and current logs.