Shelly 2.5 Device Smart Control - Relay Mode

Main Controls

Below the Main Controls heading, observe the current Shelly Device power in Watts (W), and voltage in Volts (V).

Above the power button is the Shelly Device’s consumption chart showing power consumption in Watts (W) of the last 24 hours, and the power consumption value in Watts (W).

The power button ⏻ is at the bottom of this tab. Click the power button ⏻ to turn your device On/Off. Your device is on when there is a blue ring around the power button ⏻, and is off when the ring is gray.

Notifications

If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Click the X button in the top right corner of the notification box if you wish to delete the notification.

Charts

Consumption

Observe a chart with the Shelly Device consumption displayed in Watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown. Click on the expand icon in the top right corner of the Consumption rectangular box if you wish to view the chart in full screen. Click the Export CSV button to download this data as a CSV file.

Voltage

Observe a chart with the Shelly Device maximum and minimum voltage displayed in Volts (V). Above the voltage chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific voltage measurements. Click the blue icon to the right of the date interval, above the chart, and change the displayed chart style.

Below the voltage chart are a variety of Shelly Device measurements. Observe the average, maximum, and minimum Shelly Device voltage in Volts (V).

Click on the expand icon in the top right corner of the Voltage rectangular box if you wish to view the chart in full screen. Click the Export .csv button to download this data as a CSV file.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off.

Timer

Allows you to manage the power supply automatically. You may use:

• Auto on: After turning off, the relay output will be automatically turned on after a predefined time (in seconds). Click the Save button to save any changes made.

• Auto off: After turning on, the relay output will be automatically turned off after a predefined time (in seconds). Click the Save button to save any changes made.

Schedule

Click the Add schedule button to create a schedule. Create a weekly schedule for the day(s) and time(s) you want the corresponding device to turn On/Off automatically. You may add up to 20 weekly schedules. This function requires a working connection to the Internet.

• Select the day(s) of the week. Click the NEXT button.

• Choose time interval: Time, or Sunrise / Sunset, and set the time for the previously selected day(s):

  • Time: Click up/down button, or type in a number, to set a time in hours and minutes. Set the time as AM/PM.

  • Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.

• Select action: Select the action as On / Off.

• Click the Save button to save the schedule or any changes made.

Once the schedule has been created, it will appear as a rectangular box on the main Schedule page for the Shelly Device. On this box, you can see the schedule details such as the days of the week, action and time. You can enable/disable a schedule by clicking the toggle button on the left of the schedule box. You can edit the schedule by clicking on the edit pencil icon on the right, and delete the schedule by clicking the trash icon on the right.

Actions

For each possible condition, click the toggle button to enable the condition. Click the edit icon to add URLs to trigger http endpoints. Click the + Add URL button to input up to 5 URLs. Click the trash icon to the right of a URL to delete it. Click the Save button to save any changes made. Possible conditions are:

• Button on

• Button off

• Long push

• Short push

• Output on

• Output off

This function requires a working connection to the Internet. Once you have added URLs to the conditions, you can enable/disable an action by clicking the toggle button to the left of the action box. You can edit the action by clicking on the edit pencil icon on the right. Please note that more than 2 actions can affect the normal operation of the device depending on the network infrastructure and the controlled devices.

Networks

Wi-Fi

Register the Shelly device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and the Shelly device disconnects from one of the networks, it will connect to the other.

Access Point

Enable to configure the Shelly device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.

Wi-Fi AP Roaming

Click the checkbox to enable Wi-FI AP roaming. Select an a RSSI signal strength value from the dropdown menu, below which the device will periodically scan for a better access point.

Restrict Login

Restrict the web interface of the device with a username and password.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices.

Safety

With power metering capabilities, the Shelly Device precisely monitors your appliances power consumption.

Max Power Protection

Click the checkbox to enable custom Max power protection. Configure Shelly Device to turn off when power consumption reaches a set value in watts (W). Please note the power range you can set is 0 W - 2300 W. Click the Save button to save any changes made.

Application Settings

Appliance Type

Select the appliance type the Shelly Device is connected to and operating. Choose the following from the dropdown menu:

• Lighting

• Entertainment

• Heating/cooling

• Refrigeration

• Laundry and cleaning

• Cooking

• Pool and garden

• Electric vehicle

• Ventilation

• Grid source

• Solar source

• Water heater

• Roller

• Other

Appliance Type

Select the appliance type to which the Shelly Device is connected to. Choose one of the following from the dropdown menu: Lighting / Entertainment / Heating/cooling / Refrigeration / Laundry & cleaning / Cooking / Pool and Garden / Electric vehicle / Ventilation / Grid source / Solar source / Water heater / Roller / Other. Click the Save button to save any changes made.

Consumption Calculation

Click the toggle button to enable/disable exclusion of device from total room/account consumption. Click the toggle button to use the device to record peak consumption. Click the APPLY button to save any changes made.

Consumption Hierarchy

Set the Shelly Device as a “Master” device.

Input State Display

Turn on indicator for the current status of the physical switch connected to Shelly Device. When enabled, a small line appears on the power button, below the power symbol ⏻. A red line indicates the physical switch is off, while a blue line indicates the physical switch is on.

Pin Lock

Enable and set a device pin lock.

Sync Name

Keep the device name in sync with the name given in the app.

Exclude From Activity Log

Do not show event log reports for this device in the app.

Exclude from Forgotten Light

You can exclude this Shelly Device from the “Forgotten light reminder” if your device is designated as a “light” in the “Appliance type” setting. Click the toggle button to disable the “Forgotten lights reminder” notifications and emails for this device.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and click the Remove from my account button if you wish to delete it from your account.

Settings

Eco Mode

Click the checkbox to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Operation mode

Set the operation mode of this Shelly Device.

• Relay - this mode has ON and OFF states. it is applicable for various appliances such as Lights, Sockets, etc.

• Roller Shutter - this is mode is usable for different variants of Door and Window Rollers. It supports UP, DOWN and STOP commands, and provides different settings.

Power on Default

• On: Configure Shelly device to Turn ON, when it has power.

• Off: Configure Shelly device to Turn OFF, when it has power.

• Restore last mode: Configure Shelly device to Restore the last mode it was in, when it has power.

• SWITCH: Operates the Shelly device according to the state of the switch or button connected to the device.

Long Push

Set a time to register as a long push in milliseconds (ms).

Button Type

• Momentary: Set Shelly device to be "Momentary" switch. Push for "ON" or Push for "OFF".

• Toggle Switch: Set Shelly device to be "Toggle" switch. Act as a flip switch with one state for "ON" and one state for "OFF".

• Edge Switch: Set Shelly device to be "Edge" switch. Changes state on every hit.

• Detached Switch: Set Shelly Device to be in "Detached" switch mode - switch is separated from the relays.

• Activation Switch: Use it for motion sensor. Any input turns “ON” and resets Auto OFF timer.

• Reverse inputs: If you enable this option, the buttons On/Off position will be inverted.

LED status disable

Click the checkbox to disable Wi-Fi status LED.

Firmware Update

Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the Update button.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

• Select it manually by choosing your Time zone from the dropdown menu.

  • Set the Daylight saving time as on / off / auto.

  • Input your location Latitude and Longitude.

• Select your location from the map by clicking Select from map button.

• Enable automatic detection by clicking the Auto detect location button.

Click the Save button to save any changes made.

Device Name

Change the current device name. This will reflect on the device name in the application if the “Sync name” application setting is enabled. Once you have input a device name, click the Save button to save any changes made.

Channel Name

Change the current channel name. This will reflect on the device name in the application if the “Sync name” application setting is enabled. Once you have input a channel name, click the Save button to save any changes made.

Factory Reset

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Reboot

Click the Reboot button to reboot your Shelly Device.

Device Information

Here you can view the Shelly Device ID, Device IP, and Device Type, and other device information. Click the clipboard icon to copy the desired information. Click the Delete button to delete this Shelly Device from your account.