How to pair BLU TRV with BLU Door/Window sensor
Before you start, make sure the TRV is already paired with the BLU Gateway Gen3. For more details, see How to pair BLU TRV with BLU Gateway Gen3.
Press the Reset button on the BLU TRV. The display begins to flash
, indicating it is in pairing mode.
Press and hold Reset button on the BLU Door/Window sensor for more than 10 seconds.
If pairing is successful, within maximum a minute, the TRV display shows flashing confirmation .
If pairing is not successful, the display shows 
. To complete the process, bring the sensor closer to the Gateway Gen3, and then repeat steps 1 and 2.
To find the attached sensor in Shelly Smart Control, open the application and select the TRV device from the device list.
From the left-side menu, select Sensor settings icon. The sensors are listed under the Attached sensors option.
