Shelly Pro Dimmer 1 PM Device Smart Control
Main Controls
Below the Main Controls heading, observe brightness as a percentage, the current Shelly Device power consumption in Watts (W), and voltage in Volts (V). Adjust brightness with the Shelly Device by clicking and dragging the vertical slider up and down to your desired percentage, with the percentage value shown just below the slider.
The power button ⏻
is at the bottom of this tab. Click the power button ⏻
to turn your device On/Off. Your device is on when there is a blue ring around the power button ⏻
, and is off when the ring is gray.
Notifications
If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Click the X
button in the top right corner of the notification box if you wish to delete the notification.
Charts
Consumption
Observe a chart with the Shelly Device consumption displayed in Watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific consumption measurements. Click the blue icon to the right of the date interval, above the chart, and change the displayed chart style.
Below the consumption chart are a variety of Shelly Device measurements. Observe the total energy, the average, maximum and minimum consumption in Watt-hours (Wh). Click the toggle button to show tariff distributions.
Click on the expand icon in the top right corner of the Consumption rectangular box if you wish to view the chart in full screen. Click the Export .csv
button to download this data as a CSV file.
Voltage
Observe a chart with the Shelly Device voltage displayed in Volts (V). Above the voltage chart, you can select the time interval and the date from which you want data to be shown. Drag your finger/mouse across the chart to view time specific voltage measurements. Click the blue icon to the right of the date interval, above the chart, and change the displayed chart style.
Below the voltage chart are a variety of Shelly Device measurements. Observe the average, maximum, and minimum Shelly Device voltage in Volts (V).
Click on the expand icon in the top right corner of the Voltage rectangular box if you wish to view the chart in full screen. Click the Export .csv
button to download this data as a CSV file.
Activity log
Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off, or the brightness as a percentage.
Timer
Allows you to manage the power supply automatically. You may use:
Auto on: After turning off, the relay output will be automatically turned on after a predefined time (in seconds). Click the
Save
button to save any changes made.Auto off: After turning on, the relay output will be automatically turned off after a predefined time (in seconds). Click the
Save
button to save any changes made.
Schedule
Click the Add schedule
button to create a schedule. Create a weekly schedule for the day(s) and time(s) you want the corresponding device to turn On/Off automatically, or to change to a specified brightness. You may add up to 20 weekly schedules. This function requires a working connection to the Internet.
Choose Weekday: Select the mode as Simple or Advanced for selecting days of the week.
Simple: Choose Simple mode to select day(s) of the week.
Advanced: Switch to Advanced mode for more complex schedules.
Specific days: Click the toggle button to select specific days of the month. When inactive, this function applies to all days of the month. Set the active days of the month by clicking on the desired date(s). You may also select dates using the following buttons:
Select even
Select odd
Input the dates "From" and "To" that you want to set as active dates, then click the
Select
button to choose these dates.Click the
Clear
button to clear selected dates.
Specific months: Click the toggle button to select specific months. When inactive, this function applies to all months. Select the active months using the following buttons:
Select even
Select odd
Input the dates "From" and "To" that you want to set as active dates, then click the
Select
button to choose these dates.Click the
Clear
button to clear selected dates.
Click the
NEXT
button.
Choose time interval: Select the mode as Simple or Advanced.
Simple: Choose Simple mode to select a specific time or intervals based on Sunrise/Sunset. Choose from Time, Sunrise / Sunset, and set the time for the previously selected day(s):
Time: Click up/down button, or type in a number, to set a time in hours and minutes.
Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.
Advanced: Choose Advanced mode for more complex schedules. Observe the selected times at which the schedule will be executed at the bottom of this page. Click the toggle button of the following to set them up: Hours / Minutes / Seconds. Set up each of these time units by clicking on the desired time in hours/minutes/seconds, or by clicking on the following buttons:
Select even
Select odd
Input the number "From" and "To" that you want to set as the active time, then click the
Select
button to choose these times.Click the
Clear
button to clear selected time.
Local action: You can add up to 5 actions per schedule. Click the
Add
button to add an action. Set the local action as Control Light / Toggle Light.Control Light: Follow these steps if you select Control Light.
Click the checkbox to enable Light State. Set the light state as On / Off. Click the checkbox to flip value after the set number of seconds.
Click the checkbox to set the Brightness Property, and click and drag the slider to adjust the brightness.
Click the checkbox to set transition duration property. Input a value in seconds between 0.5 and 10800 seconds.
Click the
Save
button to save the schedule action. Once saved, click on the action to edit it, or click the trash icon to the right of it to delete the action.
Schedule Details: View schedule details such as the days of the week and the time(s) at which the schedule will be executed, and the type of action.
Click the
Save
button to save the schedule.
Once the schedule has been created, it will appear as a rectangular box on the main Schedule page for the Shelly Device. On this box, you can see the schedule details such as the days of the week, action and time. You can enable/disable a schedule by clicking the toggle button on the left of the schedule box. You can edit the schedule by clicking on the edit pencil icon on the right, and delete the schedule by clicking the trash icon on the right.
Actions
Use events to trigger http endpoints. You can add up to 20 actions. Set up the following settings, and navigate between pages by clicking the NEXT
or BACK
buttons. Click the Add action
button to create an action:
Choose Component: Choose the component from the dropdown menu, choose from the following:
Light
Input (0)
Input (1)
Set Action Name: Type in action name.
Active Time: Click the checkbox to set the active time. You may leave as the 24-hour default option or choose an active start and end time. Click the up/down buttons, or type in a number, to set a time in hours and minutes.
When: Select from a variety of conditions for the button/switch depending on the previously chosen component. View the possible conditions below.
If “Light” was previously chosen as the component, choose the condition as one of the following:
Light on
Light off
If “Input (0) / Input (1)” was previously chosen as the component, choose the condition as one of the following:
Button is pushed
Button is long pushed
Button is double pushed
Button is triple pushed
Repeat When: Input the minimum interval, in seconds, between two consecutive invocations of the webhook. Any events that trigger the webhook within the specified time interval will be automatically supressed.
Actions: Input URL to send the Shelly Device a command. You may add up to 5 URLs per action, which will be executed one after the other. Click the
+ Add URL
button to add another URL to execute, or click the+ Add action from another device
to add an action from another device. If you choose to add an action from another device, set it as a Control Output / Toggle Output local action, and set the action as On/Off. You may also add a local action.Local action: Click the
+ Add local action
button to add a local action. Set the local action as Control Light / Toggle Light. Follow these steps if you select Control Light.Light State: Click the checkbox to enable Light State. Set the light state as On / Off. Click the checkbox to flip value after the set number of seconds.
Brightness Property: Click the checkbox to set the Brightness Property, and click and drag the slider to adjust the brightness.
Transition Duration Property: Click the checkbox to set transition duration property. Input a value in seconds between 0.5 and 10800 seconds.
Once you save an action, click on the edit icon pencil to edit it, or click the trash icon to the right of it to delete the action.
Click the
Save
button to save the action or to save any changes made.
This function requires a working connection to the Internet. Once the action has been created, it will appear as a rectangular box on the main Actions page for the Shelly Device. You can enable/disable an action by click the toggle button to the left of the action box. You can edit the action by clicking on the edit pencil icon on the right, and delete the schedule by clicking the trash icon on the right.
Night mode
Click the toggle button to enable night mode. Click the edit icon to adjust the active night mode settings.
Choose time interval: Choose the night mode time interval by clicking the up/down buttons, or type in a number, to set a time in hours and minutes. Click the
Next
button to navigate to the next page.Select Brightness: Click and drag the horizontal slider to set the brightness.
Click the
Save
button to save any changes made.
Scripts
Use the Scripts functionality to create or import scripts.
Library: Click the
Open Library
button to view existing scripts. Click on the desired script and click theInsert code
button to add the script to your Shelly Device.Create new script: Click the
Create new script
button. A new page will appear where you can name, create, edit and save your script. Click the play button to run your script. Click thex
button to exit the script. Click the trash icon to delete your script.
For an existing script, click the toggle button of the script you wish to enable. Click the play button of the script you wish to execute. Click the edit pencil icon to update the script, and the trash icon to delete it.
Networks
Wi-Fi
Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other. Click the Save
button to save any changes made.
Access Point
Click the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi Access Point (AP), to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access. Click the checkbox to set the AP it to be an open network. Click the Save
button to save any changes made.
Range extender
Click the toggle button to enable range extender.
Outbound websocket
Click the checkbox to enable SSL connectivity. See outbound websocket status as Connected or Disconnected. Select the type of SSL connectivity from the dropdown menu, and input the server address. Please note changing these settings requires a device reboot. Click the Save
button to save any changes made.
RPC over UDP
Input the destination address and port. Afterwards, input the listening port. Click the Save
button to save any changes made.
Cloud
Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Click the toggle button to enable this function.
To disable the cloud connection, click the toggle button again. A confirmation prompt will appear. Click the Confirm
button if you're certain you want to disable the cloud connection for this device.
Bluetooth
Click the checkbox to enable Bluetooth. Click the toggle button to enable RPC and/or Bluetooth gateway.
MQTT
Click the checkbox to enable MQTT. Configure the Shelly Device to execute actions via MQTT. Please note changing the MQTT settings requires a device reboot.
Choose the connection type, choose from the following options:
RPC status notifications over MQTT
Generic status update over MQTT
SSL connectivity
Input the MQTT prefix, the desired server, and client ID.
Input the username and password.
Click the
Save
button to save any changes made.
Virtual Components
Virtual components can be created and edited via the device’s Local Web Interface. Follow the provided IP link if you are connected to the same network as the Shelly Device. Click the toggle button to display groups or components. Click the power button if you wish to turn On/Off the group/component. Click the trash icon if you wish to delete a virtual component.
Safety
With power metering capabilities, the Shelly Device precisely monitors your appliances power consumption.
Max Power Protection
Configure Shelly Device to turn off when power consumption reaches a set value in watts (W). Set a max power value between 0 W and 230 W. Click the Save
button to save any changes made.
Max Voltage Protection
Configure Shelly Device to turn off when voltage reaches a set value in volts (V). Set a max voltage value between 0 V and 280 V. Click the Save
button to save any changes made.
Max Current Protection
Configure Shelly Device to turn off when the current reaches a set value in amperes (A). Set a max current value between 0 A and 1.22 A. Click the Save
button to save any changes made.
Undervoltage Protection
Input an undervoltage protection value in volts. You may delete the value and save to reset to the default value. Click the Save
button to save any changes made.
Application Settings
Consumption Calculation
Click the toggle button to enable/disable exclusion of device from total room/account consumption.
Pin Lock
Click toggle button to enable and set a channel pin lock.
Input State Display
Click the toggle button to add an input state identifier to the power button. Turn on indicator for the current status of the physical switch connected to Shelly Device. When enabled, a small line appears on the power button, below the power symbol ⏻
. A red line indicates the physical switch is off, while a blue line indicates the physical switch is on.
Exclude From Activity Log
Click the toggle button to exclude this Shelly Device from the global activity log.
Exclude From Forgotten Lights
Click the toggle button to disable “Forgotten Light Reminder” notifications and e-mails for this device.
Share
Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and click the Remove from my account
button if you wish to delete it from your account.
Settings
Input/Output Settings
These settings define the way the attached switch or button controls the output state. Set the input mode by selecting Button/Switch. You can set the relay type, and relay power condition when the Shelly device has power depending on the preferred usage of the device.
Set relay type:
Set Shelly device to be "Toggle" switch. Act as a flip switch with one state for "ON" and one state for "OFF". (Switch only)
Set Shelly device to be "Edge" switch. Changes state on every hit. (Switch only)
Set Shelly device to be in "Detached" switch mode - switch is separated from the relays. (Button and Switch)
Activation Switch - Used with motion sensor. Any input turns ON and resets Auto Off timer. (Switch only)
One button dimming control - Push to toggle, hold to dim up/down (changes direction on each hold). (Button only)
Dual Button dim mode - 2 inputs configuration (buttons) for up/down. (Button only)
Action on power on:
On: (Button and Switch) - Configure Shelly device to Turn ON, when it has power.
Off: (Button and Switch) - Configure Shelly device to Turn OFF, when it has power.
Restore last: (Button and Switch) - Configure Shelly device to Restore the last mode it was in, when it has power.
Click the Save
button to save any changes made.
Input Type
Set type for device input 0:
Button
Switch
Set type for device input 1:
Button
Switch
Click the Save
button to save any changes made.
Enable Input
Click the toggle button to enable an input 0/1.
Invert Input
Click the toggle button to invert device input 0/1. Click the Save
button to save any changes made.
Input Name
Set name for device input 0 and 1. Click the Save
button to save any changes made.
Calibration
Click the Calibrate
button to calibrate dimmer's current channel. To prevent calibration failure, do not modify any other channels during this procces. Click the Save
button to save any changes made.
Button Fade Rate
The button fade rate controls how quickly the output brightness changes while the button is held down for dimming. Select a rate between 1x and 5x from the dropdown menu. Click the Save
button to save any changes made.
Button Presets
Click the toggle button to change the brighness level on button double push. Input a brightness value. Click the Save
button to save any changes made
Transition Duration
Input a value between 0 and 5 seconds for the transition time. Click the Save
button to save any changes made.
Min Brightness On Toggle
Input a value between 0 and 100 to set the minimum brightness. Brightness level (as a percentage) is applied when there is a toggle and current brightness is lower than the input ‘Min brightness on toggle’. Click the Save
button to save any changes made.
Device Name
Change the current device name. This will reflect on the Shelly Device name in the application if the “Sync name” application setting is enabled. The sync is only from the application to the device and not vice-versa. Click the toggle button to sync device name. Click the Save
button to save any changes made.
Device Card Customization
You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Click the Customize device card
button to customize device card.
Choose to customize the Big Parameter Slot or Small Parameter Slot.
Big Parameter Slot:
Choose the slot as one of the following: None / Action / Parameter.
If you choose the slot content as Parameter, select the parameter type from the dropdown menu.
View the preview below.
Small Parameter Slot:
View the list of Selected Parameters and Additonal Parameters.
Click the add
+
button to add the Available Parameters. If you wish to remove a parameter, click the subtract-
button.Click the move button, and drag and drop the parameter to the desired position under Selected Parameters.
View the preview below.
Click the
Save
button to save any changes made.
Firmware Version
Shows your current firmware version. Click the Check for update
button to see if a new firmware version is available. If a newer firmware version is available, you can update your Shelly device by clicking the Update
button.
Update Automatically
Click the toggle button to Enable auto update. Add a schedule to automatically check and update the Shelly device to the latest stable firmware version. Click on Edit schedule
button, which will direct you to the Schedule page for this Shelly Device. Click the edit pencil icon and follow these steps to edit the settings of the schedule:
Choose Weekday: Select the mode as Simple or Advanced for selecting days of the week.
Simple: Choose Simple mode to select day(s) of the week.
Advanced: Switch to Advanced mode for more complex schedules.
Specific days: Click the toggle button to select specific days of the month. When inactive, this function applies to all days of the month. Set the active days of the month by clicking on the desired date(s). You may also select dates using the following buttons:
Select even
Select odd
Input the dates "From" and "To" that you want to set as active dates, then click the
Select
button to choose these dates.Click the
Clear
button to clear selected dates.
Specific months: Click the toggle button to select specific months. When inactive, this function applies to all months. Select the active months using the following buttons:
Select even
Select odd
Input the dates "From" and "To" that you want to set as active dates, then click the
Select
button to choose these dates.Click the
Clear
button to clear selected dates.
Click the
NEXT
button.
Choose time interval: Select the mode as Simple or Advanced.
Simple: Choose Simple mode to select a specific time or intervals based on Sunrise/Sunset. Choose from Time, Sunrise / Sunset, and set the time for the previously selected day(s):
Time: Click up/down button, or type in a number, to set a time in hours and minutes.
Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.
Advanced: Choose Advanced mode for more complex schedules. Observe the selected times at which the schedule will be executed at the bottom of this page. Click the toggle button of the following to set them up: Hours / Minutes / Seconds. Set up each of these time units by clicking on the desired time in hours/minutes/seconds, or by clicking on the following buttons:
Select even
Select odd
Input the number "From" and "To" that you want to set as the active time, then click the
Select
button to choose these times.Click the
Clear
button to clear selected time.
Click the
NEXT
button.
Local Action: This action has already been set up to automatically check and update the Shelly device to the latest stable firmware version. Click the
NEXT
button.View the schedule details.
Click the
Save
button to save any changes made.Click the trash icon on the schedule if you wish to delete it.
Geo Location And Time Zone
Set your time zone and geo-location in one of three ways:
Select it manually by choosing your Time zone from the dropdown menu.
Input your location Latitude and Longitude.
Select your location from the map by clicking
Select from map
button.Enable automatic detection by clicking the
Auto detect location
button.
Click the Save
button to save any changes made.
Device Reboot
Click the Reboot
button to reboot your Shelly Device.
Factory Reset
Reset your Shelly Device to its factory settings by clicking the Factory reset
button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.
Device Information
Here you can view the ID, IP and other settings of your device. Copy Device ID, Decimal ID, Device IP, and Device Type by clicking the copy icon to the right of each. Click the Delete
button to remove this device from your Shelly account.