Shelly i4 Gen 3 Device Smart Control

The power button ⏻ is at the bottom of this tab. Click the power button ⏻ to turn your device On/Off. Your device is on when there is a blue ring around the power button ⏻, and is off when the ring is gray.

Main Controls

Notifications

If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Tap the X button in the top right corner of the notification box if you wish to delete the notification.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the Device being switched On/Off.

Actions

Use events to trigger http endpoints. You can add up to 20 web hooks. Set up the following settings, and navigate between pages by clicking the Next or Back buttons. Tap Add action to create an action:

• Set Action Name: Enter the action name.

• Active Time: Mark the checkbox to set an active time. You may leave as the 24-hour default option or choose an active start and end time. Tap the up/down buttons, or type in a number, to set a time in hours and minutes.

• When:

  • Select from a variety of conditions for the input.

    • Button is pushed

    • Button is long pushed

    • Button is double pushed

    • Button is triple pushed

  • Repeat When: Input the minimum interval, in seconds, between two consecutive invocations of the webhook. Any events that trigger the webhook within the specified time interval will be automatically supressed.

• Actions: Enter a URL to send the Shelly Device a command. You may add up to 5 URLs per action, which will be executed one after the other. Click the + Add URL button to add another URL to execute, or click the + Add action from another device to add an action from another device. If you choose to add an action from another device, set it as a Control Output / Toggle Output local action, and set the action as On/Off.

• Tap Save to save the action or to save any changes made.

This function requires a working connection to the Internet. Once the action has been created, it will appear as a rectangular box on the main Actions page for the Shelly device. You can enable/disable an action by click the toggle button to the left of the action box. You can edit the action by clicking on the edit pencil icon on the right, and delete the action by clicking the trash icon on the right.

Add-on Peripherals

Tap ENABLE ADD-ON to enable the add-on functionality to this Shelly Device, which requires a restart of the Shelly Device.

Manage peripherals

Tap Add Peripheral to add an Add-on Peripheral. Please note after adding a peripheral, the Shelly Device will reboot. Select from one of the following Add-on Peripherals:

• Temperature and Humidity

• Temperature sensor

• Digital Input

• Analog Input

• Voltmeter

Tap the settings icon if you wish to edit your peripheral. Tap the trash icon of the add-on peripheral you wish to delete it.

Actions

Tap Add action to add an action for an add-on peripheral. Choose the peripheral, set the action name, active time, set up the conditions to trigger the action, and the actions to

• Choose Peripheral: Choose a peripheral from the dropdown menu.

• Set Action Name: Set the action name.

• Active Time: Mark the checkbox to set an active time. You may leave it as the 24-hour default option or choose an active start and end time. Tap the up/down buttons, or enter a number, to set a time in hours and minutes. Set the time as AM or PM.

• When:

  • Select from a variety of conditions for the button/switch. The possible conditions will vary for each peripheral.

  • Repeat When: Enter the minimum interval, in seconds, between two consecutive invocations of the webhook. Any events that trigger the webhook within the specified time interval will be automatically supressed.

• Actions: Input URL to send the Shelly Device a command. You may add up to 5 URLs per action, which will be executed one after the other. Tap + Add URL to add another URL to execute, or tap + Add action from another device to add an action from another device. If you choose to add an action from another device, set it as a Control Output / Toggle Output local action, and set the action as On/Off. You may also add a local action.

  • Local Actions: Tap + Add local action to create a local action. Select Control Output / Toggle Output from the dropdown menu to set the type of local action. If Control Output is selected, set the action as On / Off. Mark the checkbox to flip value after the set number of seconds, and enter the number of seconds. Tap Save to save the action. Once the action has been created, tap the trash icon to the right of it if you wish to delete it.

• Tap Save to save the action or to save any changes made.

Scripts

Use the Scripts functionality to create or import scripts.

• Library: Tap Open Library to view existing scripts. Tap on the desired script and tap Insert code to add the script to your Shelly Device.

• Create new script: Tap Create new script. A new page will appear where you can name, create, edit, and save your script. Tap the play button to run your script. Tap x to exit the script. Tap the trash icon to delete your script.

For an existing script, tap the toggle of the script you wish to enable. Tap the play button of the script you wish to execute. Tap the edit pencil icon to update the script, and the trash icon to delete it.

Networks

Wi-Fi

Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other. Tap Save to save any changes made.

Access Point

Mark the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi Access Point (AP), to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access. Mark the checkbox to set the AP to be an open network. Tap Save to save any changes made.

Range extender

Tap the toggle to enable the range extender.

Outbound websocket

Mark the checkbox to enable SSL connectivity. See outbound websocket status as Connected or Disconnected. Select the type of SSL connectivity from the dropdown menu, and input the server address. Please note changing these settings requires a device reboot. Tap Save to save any changes made.

RPC over UDP

Enter the destination address and port. Afterwards, enter the listening port. Tap Save to save any changes made.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Tap the toggle to enable this function.

To disable the cloud connection, tap the toggle again. A confirmation prompt will appear. Tap Confirm if you're certain you want to disable the cloud connection for this device.

Bluetooth

Mark the checkbox to enable Bluetooth. Tap the toggle to enable RPC and/or Bluetooth gateway.

MQTT

• Mark the checkbox to enable MQTT. Configure the Shelly Device to execute actions via MQTT. Please note changing the MQTT settings requires a device reboot.

• Choose the connection type, choose from the following options:

  • RPC status notifications over MQTT

  • Generic status update over MQTT

  • SSL connectivity

• Enter the MQTT prefix, the desired server, and client ID.

• Enter the username and password.

• Tap Save to save any changes made.

Application Settings

Device Card Customization

You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Click the Customize device card button to customize device card.

• Choose to customize the Big Parameter Slot or Small Parameter Slot.

  • Big Parameter Slot:

    • Choose the slot as one of the following: None / Parameter.

    • If you choose the slot content as Parameter, select the parameter type from the dropdown menu.

    • View the preview below.

  • Small Parameter Slot:

    • View the list of Selected Parameters and Additonal Parameters.

    • Click the add + button to add the Available Parameters. If you wish to remove a parameter, click the subtract - button.

    • Click the move button, and drag and drop the parameter to the desired position under Selected Parameters.

    • View the preview below.

• Click the Save button to save any changes made.

Exclude From Activity Log

Click the toggle button to exclude this Shelly Device from the global activity log.

Device Notifications

Click the toggle button next to each of the following notification types to enable them:

• Enable offline email notifications.

• Enable offline push notifications.

• Enable overtemperature email notifications.

• Enable overtemperature push notifications.

Share

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and tap Remove from my account if you wish to delete it from your account.

Settings

Eco Mode

Tap the toggle to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Input Settings

Select the input mode as a Button / Switch. Tap Save to save any changes made.

Virtual Input

Click the toggle button to enable virtual events for the input state.

Enable Input

Tap toggle to enable an input.

Invert Input

Tap the toggle to invert the input signal.

Firmware Version

Shows your current firmware version. Click the Check for update button to see if a new firmware version is available. If a newer firmware version is available, you can update your Shelly device by clicking the Update button.

Update Automatically

Click the toggle button to Enable auto update. Add a schedule to automatically check and update the Shelly device to the latest stable firmware version. Click on the edit pencil icon of the schedule and follow these steps to edit the settings of the schedule:

• Choose Weekday: Select the mode as Simple or Advanced for selecting days of the week.

  • Simple: Choose Simple mode to select day(s) of the week.

  • Advanced: Switch to Advanced mode for more complex schedules.

    • Specific days: Click the toggle button to select specific days of the month. When inactive, this function applies to all days of the month. Set the active days of the month by clicking on the desired date(s). You may also select dates using the following buttons:

      • Select even

      • Select odd

      • Input the dates "From" and "To" that you want to set as active dates, then click the Select button to choose these dates.

      • Click the Clear button to clear selected dates.

    • Specific months: Click the toggle button to select specific months. When inactive, this function applies to all months. Select the active months using the following buttons:

      • Select even

      • Select odd

      • Input the dates "From" and "To" that you want to set as active dates, then click the Select button to choose these dates.

      • Click the Clear button to clear selected dates.

  • Click the NEXT button.

• Choose time interval: Select the mode as Simple or Advanced.

  • Simple: Choose Simple mode to select a specific time or intervals based on Sunrise/Sunset. Choose from Time, Sunrise / Sunset, and set the time for the previously selected day(s):

    • Time: Click up/down button, or type in a number, to set a time in hours and minutes.

    • Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.

  • Advanced: Choose Advanced mode for more complex schedules. Observe the selected times at which the schedule will be executed at the bottom of this page. Click the toggle button of the following to set them up: Hours / Minutes / Seconds. Set up each of these time units by clicking on the desired time in hours/minutes/seconds, or by clicking on the following buttons:

    • Select even

    • Select odd

    • Input the number "From" and "To" that you want to set as the active time, then click the Select button to choose these times.

    • Click the Clear button to clear selected time.

  • Click the NEXT button.

• Local Action: This action has already been set up to automatically check and update the Shelly device to the latest stable firmware version. Click the NEXT button.

• View the schedule details.

• Click the Save button to save any changes made.

• Click the trash icon on the schedule if you wish to delete it.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

• Select it manually by choosing your Time zone from the dropdown menu. Input the latitude and longitude.

• Select your location from the map by clicking Select from map button.

• Enable automatic detection by clicking the Auto detect location button.

Tap Save to save any changes made.

Device Reboot

Tap Reboot to reboot your Shelly Device.

Factory Reset

Click the toggle button to enable factory reset from input. By enabling this setting, you can reset the Shelly Device from the device input.

Reset your Shelly Device to its factory settings by clicking the Factory reset button. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Information

Here you can view the ID, IP and other settings of your device. Copy Device ID, Decimal ID, Device IP, and Device Type by clicking the copy icon to the right of each. Click the Delete button if you wish to remove the Shelly Device from your account.