Shelly BLU Wall Switch 4 Device Smart Control

Bluetooth devices can only be configured via the Shelly Smart Control mobile phone application. You will not be able to make changes via the Shelly Smart Control website for this Shelly Device.

Main Controls

Across the top of this page, observe the Shelly Device battery as a percentage.

View the Last Reporter of the Shelly Device and details such as the room, date, and time of this report.

At the bottom of this page, observe the last click of the control button that was used to operate the Shelly Device. You may observe one of a variety of button clicks at one time. A single dot button indicates one short push of the button, two dots indicate two short pushes, and three dots indicate three short pushes. A dashed line, on the other hand, represents a long push.

Notifications

If you have Shelly Device notifications, they will appear on this tab. View the number of notifications for this Shelly Device. Tap the X button in the top right corner of the notification box if you wish to delete the notification.

Activity log

Observe the recorded history of the Shelly Device events. See the date, time and type of action executed such as the type of push of the switch.

Application Settings

Device Card Customization

You can customize both big and small parameter slots on your device’s card. After customization, changes apply everywhere that you see the device in the app. Tap Customize device card to customize the device card.

Choose to customize the Big Parameter Slot or Small Parameter Slot.
- Big Parameter Slot:
  - Choose the slot as one of the following: None / Parameter.
  - If you choose the slot content as Parameter, select the parameter type from the dropdown menu.
  - View the preview below.
- Small Parameter Slot:
  - View the list of Selected Parameters and Additional Parameters.
  - Tap the add + button to add the Available Parameters. If you wish to remove a parameter, tap the subtract - button.
  - Tap the move button, and drag and drop the parameter to the desired position under Selected Parameters.
  - View the preview below.
Tap Save to save any changes made.

Exclude From Activity Log

Tap the toggle to exclude this Shelly Device from the global activity log.

Input an email and share control of the Device with another Shelly Smart Control user. The other user will only have access to the Main Controls, Notifications, Charts, and Application Settings tabs, and the Device Information on the Settings tab. The other user cannot see the other device tabs. View which email accounts this Shelly Device has been shared with, and click the delete button to the right of the email account you would like to delete. If a device has been shared with your account, view which account shared the device with you, and tap Remove from my account if you wish to delete it from your account.

Settings

Beacon mode

Enable/disable beacon mode by tapping Enable beacon or Disable beacon.

Security

Encrypt/decrypt transmitted data by tapping Encrypt or Decrypt.

Firmware Version

Shows your current firmware version. Tap Check for update to check if a firmware updated is available. If a newer firmware version is available, you can update your Shelly device by tapping Update.

Factory Reset

Reset your Shelly Device to its factory settings by tapping Factory reset. Resetting your Shelly Device will revert it to its factory settings and delete it from your Shelly account. All previously set data will be deleted.

Device Information

You can view the Shelly Device ID, Device Mac, and Device Type here. Tap the clipboard icon to copy the desired information. Tap Delete to delete this Shelly Device from your account.