Shelly BLU Gateway Gen 3 Device Smart Control

Main Controls

View which TRV devices are connected to this Shelly device. Tap Add New TRV Device. Follow the provided instructions.

Scripts

Use the Scripts functionality to create or import scripts.

Library: Tap Open Library to view existing scripts. Tap on the desired script and tap Insert code to add the script to your Shelly Device.
Create new script: Tap Create new script. A new page will appear where you can name, create, edit, and save your script. Tap the play button to run your script. Tap x to exit the script. Tap the trash icon to delete your script.

For an existing script, tap the toggle of the script you wish to enable. Tap the play button of the script you wish to execute. Tap the edit pencil icon to update the script, and the trash icon to delete it.

Virtual Components

Virtual components can be created and edited via the device’s Local Web Interface. Tap the provided IP link if you are connected to the same network as the Shelly Device.

Tap the Groups/Components sub tabs to display the groups or components.

Groups

Follow these steps to create a Group:

Tap on Create Group.
Enter the group Name.
Mark the checkbox of the virtual component you wish to add to the group, or tap Create virtual component to create a new one. Tap the toggle if you wish to extract the group as a device.
Tap Save.

Components

In this sub tab, you can turn components on/off or create a new virtual component.

Tap the power button to turn a virtual component on/off.
Tap Create virtual component to create a new virtual component.

Follow these steps to Create virtual component:

Choose the virtual component type from the dropdown menu. Choose from the following options.

button
number
boolean
text
enum

Tap Next, and set up the virtual component type specific settings on the next page.
Tap Save to save the virtual component settings.

Networks

Wi-Fi

Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other. Tap Save to save any changes made.

Access Point

Mark the checkbox to enable this function. Enable to configure Shelly Device to create a Wi-Fi Access Point (AP), to which you can connect. Observe the SSID. Set a password to protect your device’s access point to secure your network from unauthorized access. Mark the checkbox to set the AP to be an open network. Tap Save to save any changes made.

Range extender

Tap the toggle to enable range extender.

Outbound Websocket

Mark the checkbox to enable SSL connectivity. See outbound websocket status as Connected or Disconnected. Select the type of SSL connectivity from the dropdown menu, and input the server address. Please note changing these settings requires a device reboot. Tap Save to save any changes made.

RPC over UDP

Input the destination address and port. Afterwards, input the listening port. Tap Save to save any changes made.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices. Tap the toggle to enable this function.

To disable the cloud connection, click the toggle button again. A confirmation prompt will appear. Tap Confirm if you're certain you want to disable the cloud connection for this device.

Bluetooth

Mark the checkbox to enable Bluetooth. Tap the toggle to enable RPC and/or Bluetooth gateway.

MQTT

Mark the checkbox to enable MQTT. Configure the Shelly Device to execute actions via MQTT. Please note changing the MQTT settings requires a device reboot.
Choose the connection type, choose from the following options:
- RPC status notifications over MQTT
- Generic status update over MQTT
- SSL connectivity
Enter the MQTT prefix, the desired server, and the client ID.
Enter the username and password.
Tap Save to save any changes made.

Application Settings

Tap the toggle next to each of the following notification types to enable them:

Enable offline email notifications.
Enable offline push notifications.

Settings

Eco Mode

Tap the toggle to enable/disable Eco mode. Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.

Device Name

Change the current device name. Tap the toggle to sync the device name. Keep the device name in sync with the name given in the application if “Sync name” is enabled. The sync is only from the application to the device and not vice-versa. Tap Save to save any changes made.

Device LED

Tap the toggle to enable/disable BLU Gateway’s system LED. Tap Save to save any changes made.

Firmware Version

Shows your current firmware version. Tap Check for update to see if a new firmware version is available. If a newer firmware version is available, you can update your Shelly device by tapping Update.

Update Automatically

Tap toggle to Enable auto update. Add a schedule to automatically check and update the Shelly device to the latest stable firmware version. Click on the edit pencil icon of the schedule and follow these steps to edit the schedule settings:

Choose Weekday: Select the mode as Simple or Advanced for selecting days of the week.
- Simple: Choose Simple mode to select day(s) of the week.
- Advanced: Switch to Advanced mode for more complex schedules.
  - Specific days: Tap the toggle to select specific days of the month. When inactive, this function applies to all days of the month. Set the active days of the month by clicking on the desired date(s). You may also select dates using the following buttons:
    - Select even
    - Select odd
    - Enter the dates "From" and "To" that you want to set as active dates, then tap Select to choose these dates.
    - Tap Clear to clear selected dates.
  - Specific months: Tap the toggle to select specific months. When inactive, this function applies to all months. Select the active months using the following buttons:
    - Select even
    - Select odd
    - Enter the dates "From" and "To" that you want to set as active dates, then tap Select to choose these dates.
    - Tap Clear to clear selected dates.
- Click the NEXT button.
Choose time interval: Select the mode as Simple or Advanced.
- Simple: Choose Simple mode to select a specific time or intervals based on Sunrise/Sunset. Choose from Time, Sunrise / Sunset, and set the time for the previously selected day(s):
  - Time: Tap the up/down button, or type in a number, to set a time in hours and minutes.
  - Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus.
- Advanced: Choose Advanced mode for more complex schedules. Observe the selected times at which the schedule will be executed at the bottom of this page. Tap the toggle of the following to set them up: Hours / Minutes / Seconds. Set up each of these time units by clicking on the desired time in hours/minutes/seconds, or by tapping on the following buttons:
  - Select even
  - Select odd
  - Enter the number "From" and "To" that you want to set as the active time, then tap Select to choose these times.
  - Tap Clear to clear the selected time.
- Tap Next.
Local Action: This action has already been set up to automatically check and update the Shelly device to the latest stable firmware version. Tap Next.
View the schedule details.
Tap Save to save any changes made.
Tap the trash icon on the schedule if you wish to delete it.

Geo Location And Time Zone

Set your time zone and geo-location in one of three ways:

Select it manually by choosing your Time zone from the dropdown menu. Input the latitude and longitude.
Select your location from the map by tapping Select from map.
Enable automatic detection by tapping Auto detect location.

Tap Save to save any changes made.

Device Reboot

Tap Reboot to reboot your Shelly Device.

Factory Reset

Reset your Shelly Device to its factory settings by tapping Factory reset. This will disconnect the Shelly Device from your Wi-Fi network, and all associated users, including you, will be removed from this Device. All previously set data will be deleted.

Device Information

Here you can view the ID, IP and other settings of your device. Copy Device ID, Decimal ID, Device IP, and Device Type by tapping the copy icon to the right of each. Tap Delete if you wish to remove the Shelly Device from your account.