Shelly Vintage Device Page
Status and Control
From left to right across the status and control bar, you see the Device image, name, and a power button ⏻. Click the power button ⏻ to turn your device on/off. Your device is on when there is a blue ring around the power button ⏻, and is off when the ring is gray. Directly below the status and control bar is the current Device power in watts, and brightness as a percentage.
The status and control bar remains at the top of the Device page when you click on either the Status and control or Settings tab.
Brightness
Adjust Shelly Vintage bulb brightness by dragging the slider left and right to your desired percentage.
Consumption
This tab only appears for Shelly Devices with power metering (PM) capabilities.
Observe a chart with the Shelly Device consumption displayed in watt-hours (Wh). Above the consumption chart, you can select the time interval and the date from which you want data to be shown. Below the consumption chart you have the option to download the consumption data by clicking the DOWNLOAD button. This downloads a table of your Shelly Device consumption data.
If a firmware update is available, then you will observe a "Firmware Update Available" text below the Consumption chart. Click the UPDATE button to update your Shelly Device firmware.
Settings
Timer
Allows you to manage the power supply automatically. You may use:
Auto on: After turning off, Shelly Vintage will automatically be turned on after a predefined time (in seconds).
Auto off: After turning on, Shelly Vintage will automatically be turned off after a predefined time (in seconds).
Schedule
Create a weekly schedule for the day(s) and time(s) you want the corresponding device to turn On/Off automatically. You may add up to 20 weekly schedules.
Select the day(s) of the week.
Choose time interval: time, sunrise, or sunset.
Set the time for the specified day(s):
Time: Click up/down button, or type in a number, to set a time in hours and minutes.
Sunset/Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset. Click up/down button, or type in a number, to set a time in hours and minutes.
Set the action as on/off.
This function requires a working connection to the Internet.
Night Mode
Enable night mode.
I/O Actions
When Shelly Vintage wakes up, the following actions will be executed.
For each possible condition, check the checkbox to enable the condition. Input up to 5 URLs in order to trigger http endpoints. The possible conditions are:
Output on
Output off
Internet
Wi-Fi
Register the Shelly device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and the Shelly device disconnects from one of the networks, it will connect to the other.
Access Point
Enable to configure the Shelly device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.
Restrict Login
Restrict the web interface of the device with a Username and Password.
Cloud
Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices.
Application Settings
Consumption Calculation
If your device has power metering capabilities, this application settings is available. Enable/disable exclusion of device from total room/account consumption.
Pin Lock
Enable and set a channel pin lock.
Sync Name
Keep the device name in sync with the name given in the app.
Exclude From Event Log
Do not show event log reports for this device in the app.
Share
Input an email and share control of the Device with another Shelly Cloud user. The other user will only have access to the Device's power button (on/off), and be able to see the Device Information. The other user cannot see the other device settings.
Settings
Eco Mode
Device will consume less energy and run at a lower temperature. Device will reboot if you disable/enable this function.
Power On Default
Select from the following:
On: Configure Shelly Device to turn on when it has power.
Off: Configure Shelly Device to turn off when it has power.
Restore last mode: Configure Shelly Device to restore the last mode it was in when it has power.
Transition Time
Set the transition time between 0 and 5000 milliseconds.
Firmware Update
Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the UPDATE button.
Geo Location And Time Zone
Set your time zone and geo-location manually, or enable/disable automatic detection.
Factory Reset
Remove Shelly Device from your account and return it to its factory settings. This will delete all set data.
Device Reboot
Reboot your Shelly Device.
Device Info
Here you can view the ID, IP and other settings of your device. Upon clicking Edit device, you can change the room, name or image of the device.