Adding conditions

WHEN

Click the ADD CONDITION button and choose either a Trigger-based or Time Based condition.

Trigger-based

Once selected, choose a room, and the desired device. Due to Shelly Devices having different functionalities, there are a variety of settings you can choose from to set up your condition. Shelly Devices that can meet the below conditions are in parentheses next to the condition. (Please note PM stands for power metering.)

• When:

  • Shelly Device is turned on/off. (Pro, Pro PM, EM, Plus PM, i3, i4, 1L, Uni, EM, Plug S, Vintage)

  • Input turn state (when the input is set as switch) is on/off. (Pro, Pro PM, Plus, 1L, i3, i4, Uni)

  • Button (when the input is set as button) is short / long / double short / triple short / short and long / long and short pushed. (Pro, Pro PM, Plus, Plus PM, i3, i4, 1L, Button, Uni)

  • Power consumption is above or below a certain value in watts. (All PM and EM devices, 1L, all dimmers, all plugs)

  • Temperature is above or below a certain value in ºC or ºF. (H&T, Plus H&T, Motion 2, TRV, Door/Window, Uni)

  • Humidity is above or below a certain percentage. (H&T, Plus H&T, Flood, Uni)

  • Battery is above or below a certain percentage. (H&T, Plus H&T, Flood, Motion 2, TRV, Door/Window)

  • A flood or not is detected. (Flood)

  • Prop_voltage_meter is above or below a certain value. (EM)

  • Shelly Device does or does not detect motion. (Motion 2)

  • Shelly Device does or does not detect vibration. (Motion 2, Door/Window)

  • It is dark / twilight / bright. (Motion 2, Door/Window)

  • ADC voltage is above or below a certain value in volts. (Uni)

  • Brightness is above or below a certain percentage. (Vintage)

  • Shelly Device state is open / stop / closed. (Roller)

  • Shelly Device position is above or below a certain percentage. (Roller)

  • Door/window sensor is open/closed. (Door/Window)

  • Tilt is above or below a certain percentage. (Door/Window)

  • Illumination is above or below a certain percentage. (Door/Window)

• CONDITION TYPE: Execute the scene when a certain threshold is reached. Choose from three different condition types:

  • ONCE (when condition is valid for a set number of minutes).

  • ON ANY CHANGE

  • REPEATEDLY.

Time based

Once selected, you must choose the time setting:

• timer: Create a timer for a scene to be executed every set number of minutes.

• daily / weekly schedule: Create a daily or weekly schedule. Select the active day(s) and the start time. Type in, or use the up/down buttons, to set this time.

• once: Select the date and start time.