Status and Control

From left to right across the status and control bar, you see the Device image, name, and a power button . Click the power button to turn your device on/off. Your device is on when there is a blue ring around the power button , and is off when the ring is gray.

If a firmware update is available, then you will observe a "Firmware Update Available" text below the status and control bar. Click the UPDATE button to update your Shelly Device firmware.

Settings

Web Hooks

Use events to trigger http endpoints. You can add up to 20 web hooks. Create a web hook:

  • Set web hook name.

  • Active time: May leave as the 24-hour default option or choose an active start and end time.

  • When: Select from a variety of conditions for the button/switch.

    • Input on

    • Input off

    • Button is pushed

    • Button is long pushed

    • Button is double pushed

  • Add URLs: Input URL to send the Shelly device a command. You may add up to 5 URLs per web hook, which will be executed one after the other.

Networks

Wi-Fi

Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other.

Access Point

Enable to configure Shelly Device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.

Cloud

Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices.

Bluetooth

Enable to allow Bluetooth communication.

MQTT

Enable to configure Shelly Device to execute actions via MQTT.

Application Settings

Pin Lock

Enable and set a device pin lock.

Sync Name

Keep the device name in sync with the name given in the app.

Exclude From Event Log

Do not show event log reports for this device in the app.

Share

Input an email and share control of the Device with another Shelly Cloud user. The other user will only have access to the Device's power button (on/off), and be able to see the Device Information. The other user cannot see the other device settings.

Settings

Input/Output Settings

Set the Shelly Device input as a button or switch.

Invert Switch

If enabled, the device will consider the switch is on, while it is actually switched off and vice versa.

Firmware Version

Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the Update button.

Geo Location And Time Zone

Set your time zone and geo-location manually, or enable/disable automatic detection.

Device Reboot

Reboot your Shelly Device.

Factory Reset

Remove Shelly Device from your account and return it to its factory settings. This will delete all set data.

Device Information

Here you can view the ID, IP and other settings of your device. Upon clicking Edit device, you can change the room, name or image of the device.