Status and control

From left to right across the status and control bar, you see the Device image, name, and current room temperature. Directly below the status and control bar is the current room humidity and Device battery as percentages.

The status and control bar remains at the top of the Device page, when you click on either the Status and control or Settings tab.

Temperature

Observe a chart with the Shelly Plus H&T recorded temperature given in ºC/ºF (change this under Device Settings). Above the temperature chart, you can select the time interval and the date from which you want data to be shown. The temperature chart shows the maximum and minimum temperature of the room throughout the chosen time interval. Below the temperature chart you have the option to download the temperature data by clicking the DOWNLOAD button. This downloads a table of your Shelly Plus H&T temperature data.

Humidity

Observe a chart with the Shelly Plus H&T recorded humidity given as a percentage. Above the humidity chart, you can select the time interval and the date from which you want data to be shown. Below the humidity chart you have the option to download the humidity data by clicking the DOWNLOAD button. This downloads a table of your Shelly Plus H&T humidity data.

If a firmware update is available, then you will observe a "Firmware Update Available" text below the humidity chart. Click the UPDATE button to update your Shelly Device firmware.

Settings

Sensor Settings

Temperature Units

Select ºC/ºF to be the units shown the temperature on the display.

Temperature Threshold

Input a value in Celsius (ºC) for the threshold temperature change which will cause the Device to wake up and trigger a sensor data report. (Min: 0.5 ºC - Max: 5 ºC)

Humidity Threshold

Input a value for the threshold relative humidity change which will cause the Device to wake up and trigger a sensor data report. (Min: 1 % - Max: 20 %)

Web Hooks

Use events to trigger http endpoints. You can add up to 20 web hooks. Create a web hook:

  • Set web hook name.

  • Active time: May leave as the 24-hour default option or choose an active start and end time.

  • Condition: Select from a variety of options.

    • temperature change

    • humidity change

    • temperature C is:

      • less than / not equal to / less than / less than or equal to / greater than / greater than or equal to

      • type in desired temperature

    • temperature F is:

      • less than / not equal to / less than / less than or equal to / greater than / greater than or equal to

      • type in desired temperature

    • relative humidity is:

      • less than / not equal to / less than / less than or equal to / greater than / greater than or equal to

      • type in desired relative humidity

  • Add URLs: Input URL to send the Shelly device a command. You may add up to 5 URLs per web hook, which will be executed one after the other.

Networks

Wi-Fi

Register the Shelly device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and the Shelly device disconnects from one of the networks, it will connect to the other.

Access Point

Enable to configure the Shelly device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.

Cloud

Enable to connect the Shelly device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices.

Bluetooth

Enable to allow Bluetooth communication.

MQTT

Enable to configure the Shelly device to execute actions via MQTT.

Application Settings

Sync Name

Keep the device name in sync with the name given in the app.

Exclude From Event Log

Do not show event log reports for this device in the app.

Share

Input an email and share control of the Device with another Shelly Cloud user. The other user will only have access to the Device's power button (on/off), and be able to see the Device Information. The other user cannot see the other device settings.

Settings

Device Name

Set a name for your device.

Firmware Version

Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the Update button.

Geo Location And Time Zone

Set your time zone and geo-location manually, or enable/disable automatic detection.

Device Reboot

Reboot your Shelly Device.

Factory Reset

Remove Shelly Device from your account and return it to its factory settings. This will delete all set data.

Device Information

Here you can view the ID, IP and other settings of your device. Upon clicking Edit device, you can change the room, name or image of the device.