Status and Control
From left to right across the status and control bar, you see the Device image, name, and a power button
⏻. Click the power button
⏻ to turn your device on/off. Your device is on when there is a blue ring around the power button
⏻, and is off when the ring is gray.
If a firmware update is available, then you will observe a "Firmware Update Available" text below the status and control bar. Click the
UPDATE button to update your Shelly Device firmware.
Allows you to manage the power supply automatically. You may use:
Auto on: After turning off, the relay output will be automatically turned on after a predefined time (in seconds).
Auto off: After turning on, the relay output will be automatically turned off after a predefined time (in seconds).
Create a weekly schedule for the day(s) and time(s) you want the corresponding device to turn On/Off automatically. You may add up to 20 weekly schedules.
Select the day(s) of the week.
Choose time interval: time, sunrise, or sunset.
Set the time for the specified day(s):
Time: Click up/down button, or type in a number, to set a time in hours and minutes.
Sunset/Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time before or after sunrise/sunset. Click up/down button, or type in a number, to set a time in hours and minutes.
Set the action as on/off.
This function requires a working connection to the Internet.
Use events to trigger http endpoints. You can add up to 20 web hooks. Create a web hook:
Set web hook name.
Active time: May leave as the 24-hour default option or choose an active start and end time.
When: Select from a variety of conditions for the button/switch.
Button is pushed
Button is long pushed
Button is double pushed
Add URLs: Input URL to send the Shelly device a command. You may add up to 5 URLs per web hook, which will be executed one after the other.
Register Shelly Device to connect to up to 2 different Wi-Fi networks. Either input or select the Wi-Fi network. Can select an open network, and also set a static IP address. Enable Wi-Fi 1, or Wi-Fi 2, or both at the same time. If both Wi-Fi 1 and Wi-Fi 2 are enabled, and Shelly Device disconnects from one of the networks, it will connect to the other.
Enable to configure Shelly Device to create a Wi-Fi AP and you can connect to its network. Can also set it to be an open network.
Enable to connect Shelly Device to its cloud. This allows you to control it remotely, and receive notifications and updates about your devices.
Enable to allow Bluetooth communication.
Enable to configure Shelly Device to execute actions via MQTT.
Enable and set a device pin lock.
Keep the device name in sync with the name given in the app.
Input State Display
Turn on indicator for the current status of the physical switch connected to Shelly Device. When enabled, a small line appears on the power button, below the power symbol
⏻. A red line indicates the physical switch is off, while a blue line indicates the physical switch is on.
Exclude From Event Log
Do not show event log reports for this device in the app.
Input an email and share control of the Device with another Shelly Cloud user. The other user will only have access to the Device's power button (on/off), and be able to see the Device Information. The other user cannot see the other device settings.
These settings define the way the attached switch or button controls the output state. The possible input modes are button and switch. You can set the relay type, and relay power condition when the Shelly device has power depending on the preferred usage of the device.
Set relay type:
Set Shelly device to be "Toggle" switch. Act as a flip switch with one state for "ON" and one state for "OFF". (Switch only)
Set Shelly device to be "Momentary" switch. Push for "ON" or Push for "OFF". (Button only)
Set Shelly device to be "Edge" switch. Changes state on every hit. (Switch only)
Set Shelly device to be in "Detached" switch mode - switch is separated from the relays. (Button and Switch)
Set relay power on default:
On: (Button and Switch) - Configure Shelly device to Turn ON, when it has power.
Off: (Button and Switch) - Configure Shelly device to Turn OFF, when it has power.
Restore last: (Button and Switch) - Configure Shelly device to Restore the last mode it was in, when it has power.
Match input: (Switch only) - Operates the Shelly device according to the state of the switch or button connected to the device
If enabled, the device will consider the switch is on, while it is actually switched off and vice versa.
Set a name for your device.
Shows your current firmware version. If a newer version is available, you can update your Shelly device by clicking the
Geo Location And Time Zone
Set your time zone and geo-location manually, or enable/disable automatic detection.
Reboot your Shelly Device.
Remove Shelly Device from your account and return it to its factory settings. This will delete all set data.
Here you can view the ID, IP and other settings of your device. Upon clicking
Edit device, you can change the room, name or image of the device.